SOURCE: unsure of correct tyre pressures for 2000 yzf-r1
Hi,
Your tire pressures should be 250 kPa (2.5 kgf/cm2, 2.5 bar, 35.6 psi) for the front, and 290 kPa (2.9 kgf/cm2, 2.9 bar, 41.3 psi) for the rear.
I wasn't sure of your country, so I posted all.
Hope this helps
SOURCE: engine cuts out at 8000 rpm in any all gears
check your tank breather hose for any blocks or kinks - also have a look at the fuel filter and airbox.
SOURCE: Will 2000 Yamaha R1main switch (iginition) fit an R6?
if the wiring diagram where the same it will work.
SOURCE: my 2000 yzf r1 speedo quit working, only reads
sounds like the speed sensor is gone. do you get an error code?
203 views
Usually answered in minutes!
×