Question about 2005 Suzuki GSF 1200 Bandit S

2005 Suzuki GSF 1200 Bandit fuel and vacuum line routing

Carburetor fuel line and vacuum line diagram and location @

3 Related Answers

tombones

3567 Answers

Christmas comes early. Go to the site below and you can download a free PDF service manual. Yours is the 1st one in the "Suzuki GSF" section of the list. 4 or 5 below that is a PDF parts diagram with part numbers.

http://www.carlsalter.com/motorcycle-manuals.asp Most manuals are in English but some are not. There is no way to be sure without doing the download. You can always delete it if in a foreign language.

Top rating due for this answer! Thanks Asel :)

Posted on May 08, 2009

Terrie Thiessen

302 Answers

SOURCE: needs wiring diagram for suzuki banhdit gsf 650 k8

http://netfree1.blogspot.com/2008/09/suzuki-gsf650-bandit-service-repair.html
Hope this helps.

Posted on Nov 19, 2009

Rasputin666

413 Answers

SOURCE: Vacuum leak in carburetor. No vacuum available at the port to the fuel valve.

The carb diaphragms don't provide vacuum to the fuel valve...this comes from the motor sucking in as it turns.
Check that the vac hose isn't split/blocked or leaking and that it is a good fit. Also blow the carb spigot through to make sure it isn't blocked

Posted on Mar 04, 2013

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0 Answers

Buddy 125 no fuel to the carburetor

Jul 26, 2018 | Tank Motorcycles

0 Answers

Scooter not getting fuel to the carburetor

Jul 05, 2018 | Motorcycles

0 Answers

2009 Gilera Runner VX 180 not getting fuel

May 09, 2018 | 2009 Gilera Runner ST 125

0 Answers

The fuel system on a X speed 50 R i'm not getting fuel to carburetor it's past the fuel filter but not to the carburetor

Nov 23, 2016 | Motorcycles

1 Answer

Scooter not getting gas to carb.

Silly question, but are you sure you are getting gas through the line? Could the line from the tank be plugged? How about the tank port?
Is there a fuel shutoff?

May 10, 2016 | Motorcycles

1 Answer

Vacuum diagrams for 1996 Harley

Not much in the way of diagramming. The vacuum line from the fuel shutoff valve runs to the vacuum port on the carburetor. That is all there is.

Jul 21, 2012 | Harley Davidson FLHRCI Road King Classic...

1 Answer

Vacuum lines for 1996 harley

The only vacuum line runs from the vacuum port on the carburetor to the fuel shut off valve vacuum port.

Jul 21, 2012 | Harley Davidson FLHRCI Road King Classic...

0 Answers

Its a 1985 Yamaha xj700 maxim that has a problem with the fuel and vacuum line, from the fuel tank to carburetors and drain line diagrams

Apr 02, 2011 | 1985 Yamaha XJ 700 X Maxim

1 Answer

Working on a friends 81 yamaha 650xs. I removed and cleaned the carbs and put them back on but can t remember how the T hose from the petcock to the carbs hook up. Can someone help me

The petcock on these bikes is vacuum operated, which means that there are two hoses that go to it. The thicker hose is the fuel line and it runs from the thick port on the petcock to the fuel input on the carburetor rack. The fuel input on the carburetors is located between the number two and number three carburetor bodies. If you aren't sure which is the fuel connection, just turn the petcock switch to prime for a second and you will see gas come out of the fuel connection.

The thinner hose on the petcock is a vacuum line. It runs from the vacuum port on the #3 cylinder (between the carburetor body and the engine) up to the smaller connection on your petcock. When the engine is turning vacuum is applied to this thinner line and allows fuel to run from the tank into the carburetors.

There are the only two lines that should run to your petcock, and the fuel line should not be split anywhere between the petcock and the carburetors.

Good Luck,
-Josh

Feb 24, 2011 | 1981 Yamaha XJ 650

1 Answer

Need a diagram of fuel gas lines on a 131 poulan

Lots of research has shown a lack of diagrams on fuel line routing. Your carburetor has the purge/primer bulb on top of it. Just to help you understand how it works....the bulb uses a vacuum effect to pull fuel from the tank directly into the carburetor and the check valves in the plate under the bulb (known as the primer base assembly) push any air and old fuel inside the carb back into the fuel tank. On your model, the line inside the tank with the fuel filter on it will come out and go to the carburetor body BELOW the base assembly. The other line coming out of the tank (fuel return line) will go TO the nipple on the base assembly. The lines should be nice and soft and so should the bulb. They all have to be replaced periodically as alcohol, heat and age deteriorate them. Please post back if needed.

Nov 06, 2010 | Poulan/Weed Eater No. Te475 952711797 17"...