Seat removal on a ybr125

how much free play you got on the clutch lever ? 3mm max !! or do you mean it just wont select at all what ever ? mite have bent the selecter fork ! remove clutch cover while the bike is leaning over on opposite side so oil stays in ! look and operate gear lever !

Hi vikeshharryp,
Here is your wiring diagram


Hope I helped you.
Have a nice day!

please rate highly if this is what you need

Section 01-10: Seats and Tracks 1994 Mustang. Workshop Manual
REMOVAL AND INSTALLATION Seat Cushion, Rear Removal and Installation

1. Release pin from locks by pressing release button under rear seat cushion.

1. Pull rear safety belt and buckle (60044) through openings in rear seat cushion pad and frame (600A88) and remove rear seat cushion pad and frame .

1. To install, reverse Removal procedure.
   

----------------------------------------------
Section 01-10: Seats and Tracks 1994 Mustang. Workshop Manual
REMOVAL AND INSTALLATION Seat Back, Rear Sedan
Removal

1. Remove rear seat cushion as outlined.

1. Remove rear seat bolster. Refer to Section 01-05 .

1. Remove rear seat bolster mounting bolts. Remove bolster assembly.
2. Remove four seat back to package tray retaining bolts.

1. Remove seat back.

1. To install, reverse Removal procedure.

They will to be drilled need out.


Please rate this solution