Honda bali sj 50, the electric ignition crashed just as the horn and turn signals. The light works. thereafter to put the bike to work wearing the kick, but now this kick also not working very well, so I cleaned the carburetor. the bike runs but does not put up, only if you are speeed up. Now the kick is getting stuck, the bike dont start and do not know what else to do.

Murtaza Akberali Versi

• 767 Answers
• Posted on Apr 21, 2009

SOURCE: Self Starter problem with Karizma R (Sep 2007)

Check the fuses too and basically all the wiring, there could be somewhere a loose connection also check the wires at the solenoid switch.

SOURCE: 79 gs550 - uh ohs in wiring...

When you reassembled the bike did you pinch any of the wiring harnesses? Trace the wiring through the bike and make sure everything has a solid connection between their respective power sources and activation switches. Alot of time bikes run wiring under the gas tanks so you need to make sure that you didnt cut anything when pputting it back on (if you removed the tank)

SOURCE: my boulevard s 50 wont start

check your fuel delivery sys

SOURCE: 92 FXR bike will not start or even turn over

that clicking sound is the starter solenoid. check all large cables for corrosion and tightness. as for the signal lights, neutral and horn, i think a wire is grounding , thus causing the problem with the bike not starting also. check at ignition switch and at handle controls for a loose wire that may be touching the handlebar. basically inspect all the wiring on the bike

SOURCE: 1988 Heritage Softail, electrical problem,

Probably time for a new battery. But first, check to be sure that water covers the top of the battery plates. Add water if needed.