Question about 2011 TGB 101S 50
How do I derestrict a tgb 101s scooter 2012 model @
Posted by Anonymous on
Hi, Anonymous derestrict is a negative term rider's use to express their wish to improve performance on their bike or scooter. Depending on the country and motor vehicles laws some bikes and scooters are designed to conform with said laws and their performance is slightly lower than other countries. All vehicles in the world are designed to perform at 75-80% of their maximum potential, this ensures the longevity of the engine. Derestricting or improving performance is always possible on any vehicle but the tradeoff of engine longevity numbers go down, how much depends on the number and type of performance upgrades. Your local dealership or reputable independent shop are best equipped to provide you with technical data and willingness to comply with your needs.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Posted on Jan 15, 2020
Normally, one goes to the carb, one to the gearbox and one to the battery. What sounds really weird is the diameter of the hoses. Three quarter and one inch diameter? Normally 1/4" to 3/8".
Hope this helps!
Please rate this solution. Thanks locjaw69!
Posted on Apr 04, 2009
SOURCE: how to or can i
first major restrictor is in the exhaust pipe. Take off all the securing nuts and bolts to remove the pipe. You will notice in the end of the pipe that fits to the cylinder head there will be a washer that reduces the bore of the pipe. You will need to grind away the weld that secures this washer, clean out all metal particles and refit pipe to bike. This will dramatically improve the performance. Hope this helps' Alex.
Posted on May 17, 2011
SOURCE: TGB 101S will not idle
Hi, Anonymous you may need to "DIP" the carb and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Vacuum line from the petcock to intake manifold cracked.
5. Float needle and seat sticking.
6. Float level too low.
7. Carburetor bowl vent line clogged/blocked/pinched.
8. Idle adjusting screw set too low.
9. Air/fuel mixture screw set too lean.
10. Idle port, transfer ports, slow air jet clogged.
11. Slow fuel jet clogged.
12. Faulty fuel pump.
13. Faulty auto choke or wiring connection.
For more information about your issue and valuable "Free" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
50cc Scooter Won stay running
HELP scooter wont stay running clean carb
TGB Service Manual 101S BH1 303R 50 BR1 Delivery 50 BK1 China scooter TGB TAPO Parts
Please Check First
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on Mar 25, 2018
Tips for a great answer:
Mar 25, 2018 | TGB Motorcycles
Jul 28, 2016 | 2006 TGB Laser
Jul 01, 2016 | TGB Motorcycles
Feb 14, 2013 | 2011 TGB 101S 50
Feb 09, 2018 | 2011 TGB 101S 50
Apr 04, 2009 | 2005 Kymco Stryker 125
May 26, 2020 | Motorcycles
264 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: