Question about 2002 Harley Davidson FLHRCI Road King Classic

2 Answers

The new plastic tubes are a MOTHER to get on fuel Filter & Pump is there a secret mojo to doing this? 2001 Road King Classic

Posted by Julio Berrios on

Ad

2 Answers

Rob Stephenson

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Harley Davidson Expert
  • 284 Answers

I use some spray wax on the inside of the hose. It makes it go on a little easier but they're still a pain to install.

I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_5bac37c3cb991fdb

Posted on Nov 25, 2013

Ad

Rasputin666

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 413 Answers

I used a heat gun to lightly warm the ends of the pipes...slides on without a problem then...let them cool and then tighten the clamp

Posted on Dec 12, 2013

Ad

5 Related Answers

Anonymous

  • 2 Answers

SOURCE: can't find fuel pump

THE FUELPUMP IS LOCATED IN THE TANK,REMOVE YOUR TANKCONSOLE AND THE WIRING,THEN YOU LOOSEN THE EIGHT SCREWS HOLDING THE PLATE AND INSIDE IS THE FUELSENDER AND THE PUMP AND THE FILTER,ITS QUIT TRICKY TO RENOVE IT AND YOU YOU HAVE TO CUT OFF THE CLAMPS TO THE FUELLINES THAT IS ATTACHED TOTHE PUMP

Posted on Feb 08, 2009

DJ_MAX1369

Harley Morris

  • 119 Answers

SOURCE: fuel pump?

the fuel pump for your 2000 fuel injected road king is located in the fuel tank. you will have to remove the speedometer housing, by first removing the seat, then remove the one small screw near the seat that holds the speedometer housing in place, also remove the small screw at the front of the speedometer housing and lift the housing off the tank and disconnect the wiring that goes to the back of the speedometer. there is a large oval shaped gold in appearance plate on top of the fuel tank. this plate is what the fuel pump is mounted to.

Posted on Mar 31, 2009

stephensaon_

Rob Stephenson

  • 284 Answers

SOURCE: delphi or magnetti marelli fuel injection

If you look at the top of the Induction module, you'll see if it is either black ( single looking tube ) or Silver ( Looks like 2 tubes together ) Single tube is Delphi, Silver Dual tube is Magnetti .

I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_5bac37c3cb991fdb

Posted on Jun 12, 2009

Anonymous

  • 269 Answers

SOURCE: how to replace fuel filter on harley davidson 02

I am having problems viewing the reply but if you have a FLHRCI then to replace the fuel filter you will need to be prepared to put some time into it.
First remove the console off the fuel tank, one nut below speedo and the phillips screw lower close to the seat. You will have a disconnect on the top left side of the fuel tank to disconnect. Then disconnect the vent tube from the tank with a gentle pull & twisting motion. Now the fun part there are ten torx T20 screws you need to remove, but first you must go buy new ones along with the gasket and fuel filter kit. DO NOT reuse the screws. Now for whatever reason they call this piece a canopy, go figure. Once you have your parts go ahead and raise the canopy slightly and twist it to the left a little. Now this can be tricky because there is a spring loaded hng to work here, be care not to over stress any thing. Then you can begin to pull the canopy and components from the tank. You will be limited by the convoluted tubes (hose) attached as to how far you can raise the canopy, if you remove one be careful as where they attach is plastic and breaks....easily sometimes, then you need a $350 part.
Next read and look at the diagrams that come with your new fuel filter to install it. Once done carefully reverse the canopy removal process and tighten the canopy bolts in cross pattern o somewhere between 18-27 in-lbs. Hope this helps.

JP

Posted on Aug 15, 2009

Anonymous

  • 150 Answers

SOURCE: Idel adjustment on fuel injected road king.\not on

Thats not totally correct. remove your air filter cover. look to the lower right side. You will see a small hole thats where the screw driver goes in to adjust your idle. Ya the dealer has a scanlizer that can also do it if u want to spend the bucks.

Posted on Dec 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuel filter replacement on road king


If it is carburetted the screen is in the shutoff valve. If it is EFI the filter will be in the fuel tank with the fuel pump.

May 17, 2014 | 2001 Harley Davidson FLHTCUI Electra Glide...

1 Answer

Where is the fuse box on a 2001 hd road king classic


Hi Anonymous, remove seat and directly behind the battery is a black plastic box. The cover slides up and off revealing the starter relay and the system/fuel pump relay for you injected folks and the various assorted circuit fuses. Good luck

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Aug 01, 2013 | 2001 Harley Davidson FLHRCI Road King...

1 Answer

Changing fuel filter.where is it located


it is inside the fuel tank atached to the pump you will need 10 new sealing screws and a new tank seal

Jul 25, 2011 | 2002 Harley Davidson FLHRCI Road King...

1 Answer

My 2000 road king classic isnt getting fuel. i disconnect the fuel lines and pure. it starts up but stops


First try replacing your fuel filter......if that doesn't fix it you likely need a new fuel pump

Jul 01, 2011 | Harley Davidson FLHRC Road King Classic...

1 Answer

How do you change the fuel filter on Road King Classic 2006


Remove top of fuel tank, remove fuel pump etc and then you can change the filter.

May 11, 2011 | 2006 Harley Davidson FLHRCI Road King...

1 Answer

My 2001 road king will not start, check the coil the coil is good 12v going to the coil check good,and fire to the plugs good,,but the fuel pump sounds a little noisy, any ideal...... what to do next...


If that fuel pump is on its last leg, it might not be putting out enough pressure to operate the injectors. If you know how to connect a pressure gauge, safely, do it to learn what it is putting out. If you aren't sure about how to do it, most dealers will pick up the bike free of charge. Or, pull the tank and install a new pump.


But be careful, gasoline can be dangerous stuff.

Aug 29, 2010 | 2001 Harley Davidson FLHRCI Road King...

2 Answers

Delphi or magnetti marelli fuel injection


If you look at the top of the Induction module, you'll see if it is either black ( single looking tube ) or Silver ( Looks like 2 tubes together ) Single tube is Delphi, Silver Dual tube is Magnetti .

I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_5bac37c3cb991fdb

Mar 21, 2009 | 2001 Harley Davidson FLHRCI Road King...

Not finding what you are looking for?
2002 Harley Davidson FLHRCI Road King Classic Logo

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6213 Answers

Mike

Level 3 Expert

4369 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...