Is it possible to change km to miles on ybr250 odometer

Go into the driver info center and bring up the speedo settings, it is there.

On a digital display the default in U.S. is miles. Refer to your owner's manual or call dealer if you need to change it. A km is .6 of a mile, so just drive about 10 blocks (around a mile). If the odometer registers around 1 unit more it's probably miles, if it says close to 2 then it's probably km.

I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

Here is an example of miles to kilometers

mi -> kmkm = mi * 1.6093km = 107.098 * 1.6093km = 172.36
or kilometers to miles
km -> mimi = km _______ 1.6093mi = 107.098 ________ 1.6093mi = 66.548

You can just hold down the select button with the ignition on and that will also change it

there should be a button on the dash or under the speedometer

If the odometer is a digital display, you may need to take it to the dealer to get the computer to report miles. This function may not be available to non-GM scanners. If it is a mechanical speedometer, you probably need to replace the entire head to get miles display. Check with wrecking yards for a used one. You can drive the odometer one way or the other by using a short length of cable in an electric drill.

you can buy after market console lay out that will show miles

there should be a menu button some where on the dash that will let you select it also it might have the gauge with both mph and km on it your owners manul should tell you how to change it

okay,for one,the odometer doesnt read in miles per hr,it reads miles driven, and two i have no idea if its possible to change the odometer to km traveled,if you're talking about the speedometer,its already there,get a european cluster :p