SOURCE: 93 Dyna low rider fork oil.
your local hd shop should be able to answer this for you as its a mesured amount and to much or too little will make the bike not handle right
SOURCE: how do you remove battery from dyna low rider
I have an early model and I think they're still the same in that area. There are two bolts on the right side of the battery support. Loosen these two bolts and the battery will drop down a bit allowing you to remove the battery top cover and front cover.
SOURCE: need to know how to
There are two plugs on the bottom of the transmission, one for the engine oil, one for the tranny lube. The engine oil drain is the one that is closest to the left front corner of the oil pan. The other plug is the transmission.
The engine requires three quarts of oil, the tranny takes 20-24 ounces of oil.. Check the engine oil with the bike on the side stand. There are two marks on the dipstick. The upper mark is the "FULL HOT", the lower mark is the 'FULL COLD" mark. Keep the oil level between these two marks and do not overfill.
On the transmission, on the right side of the transmission, you'll see a chrome clutch release cover. It's behind the exhaust system. There is a plug that takes a 3/8" Allen or Hex key to remove. Check the oil level with the bike standing straight up.
As for what lubricants to use, I always use nothing but Harley-Davidson oil. 20W50 Syn 3 oil in the engine, transmission, and primary on 2000 and later model bikes. However, you can use other oils such as Amsoil, Royal Purple, Mobil, Motor Factory, and many others. Synthetic or petroleum based, your choice. Check the website of the manufacturer that you wish to use.
Good Luck
Steve
119 views
Usually answered in minutes!
×