Question about Motorcycles
Posted by Anonymous on
Hi, Anonymous I would love to help you with your engine or chassis noise but I just loaned my brand new pair of listening ears to your local dealer's chief technician so he could take your bike for a test ride and give you his professional opinion and estimate about your noise and repair cost. If you are a little short on "DRACHMA" and a Dealership is not on your list of fun places to visit then perhaps the list below will help soothe your worried mind so you can make an informed decision.
3. Brake Rotors---BUZZ
4. Cam Chains---CLICK
7. Fairing Panels---WHISTLE
9. Fronk Forks---Plunk
10. Fuel pumps---WHIRR
12. Head Gasket---HISS
13. Hydraulic Lifters---TAP
14. Instrument Clusters---BUZZING
15. Kick Starter---GRINDS
17. Power Valves---CLINK---RATTLE
19. Rear Chains---RATTLE
20. Rear Shocks---SQUEAK
22. Rods Go---KNOCK-KNOCK---who's there, it's me "*****"
23. Shaft Drives---WHIRR
24. Shifting Trans---CLUNK
25. Solid Lifters---TICK
28. Starter Clutch---GRIND---WHIRR
29. Warning Lights---BEEP
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Posted on Aug 06, 2020
The speaker on the non-playing side is blown. Disconnect it or the amp will get fried as well. The coil has loosened from its form and is rattling against the speaker frame. If the insullation on the coil wires gets worn enough,it will short against the frame and possibly smoke that amp channel.
Posted on Mar 19, 2008
First you got to determen where its comming from, surley you can hear if its comming from top of engine or from oil pan, i'am not there to hear it so its hard to tell what it is, but i can take some gusses on what it could be. You said a while back it started tapping, that could be a loose or woren rocker or lifter does it run on all cyls. no miss, good oil pressure, could be a connecting rod. The millage is high and things do wear out.
Posted on Feb 15, 2009
On some othersites it was said that the plate on the discharge impeller came loose and was banging on the black metal impeller. When I took mine apart that what mine looked like. I glued mine back with J B WELD, and there is still some noise during rinse. One person said he took it out and the noise went away. The part came be bought for about $15.00 online. Are there any torque specs for these screws?
Posted on Feb 22, 2009
Sounds to me this dealer found a money pit. Why would they want to replace the gearbox again? Does it make the sound when you turn the wheel both ways or just one way? Do you have the correct size tires on the front? If there bigger than what the manufacturer put on it they may be rubbing on the inner fender or swaybar.
Posted on Apr 13, 2009
Tips for a great answer:
Jun 19, 2018 | 2011 Yamaha WR125X
Jun 08, 2015 | Cars & Trucks
Jan 23, 2014 | 2011 Yamaha WR125X
Sep 11, 2013 | 2011 Yamaha WR125X
Jul 06, 2013 | 2011 Yamaha WR125X
Jun 23, 2013 | 2011 Yamaha WR125X
Mar 07, 2013 | 2011 Yamaha WR125X
Mar 19, 2012 | 2011 Yamaha WR125X
Sep 01, 2011 | 2011 Yamaha WR125X
Jun 22, 2011 | 2011 Yamaha WR125X
75 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: