Question about 1993 kawasaki ZZR 1100

1 Answer

Replace indicator bulb in the dash 1993 Kawasaki ZZR 1100

How do I remove indicator bulb on dash Kawasaki zzr1100 93 d1 @

Posted by Susan Brown on

Ad

1 Answer

Gregg Mahin

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • kawasaki Master
  • 64,523 Answers

Hi, Susan for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.visordown.com/forum/workshop/change-instrument-lights-on-a-zzr600-how
https://www.youtube.com/watch?v=2Al5CfmKK4k
Kawasaki Ninja ZX 11 Service Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Posted on Jun 12, 2019

Ad

3 Related Answers

Anonymous

  • 76 Answers

SOURCE: find oilfilter location on kawasaki zzr 1100

Bottom of motor there is about a 31/2" round cover with a bolt through the middle thats the filter you may have to remove the exhaust to get to it on your bike

Posted on Jan 30, 2010

Ad

Rasputin666

  • 413 Answers

SOURCE: kawasaki 1994 ZZR 1100 d camshaft bolts torque settings

Camshaft cap bolts are 12 N-m

Posted on May 22, 2012

SOURCE: where do i pot engine oil in kawasaki zzr 1100 d1

Bike engine oil normally goes into the clutch housing (right hand side of engine.This picture shows your bikes oil filler plug. images?q=tbn:and9gcqm5udbpqb2w7fmawkkvfjinvwqixogadpxebxn60n4thur5s51

Posted on Feb 04, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1988 Kawasaki GPX 750 R dash lights not working


Hi, Andrew if you have a dash or instrument light that is out and you have confirmed that the bulb is good then you need to do some quick diagnostics all you need is a test light and a wiring diagram usually found in the back of your service or owners manual.
1. Make sure your battery is fully charged with "CLEAN" and "TIGHT" connections and the instrument light fuse is not blown.
2. Inspect the bulb socket for corrosion and clean as necessary, a spray can of electrical contact cleaner and compressed air works the best.
3. Confirm your test light is working properly by connecting one end to the battery negative post and touching battery positive post with the sharp probe, the test light should illuminate.
4. With the ignition turned on to confirm you have power to the bulb socket by connecting your test light to battery negative or ground and probe the center contact, the test light should illuminate if not you need to check the integrity of the switch or sending unit the light represents, if that is ok then you have a short in the wiring between the component and the light bulb, if all is ok proceed to the next step.
5. Confirm you have a good ground to the light bulb socket by connecting the test light to battery positive and probe any metal part of the socket housing, the test light should illuminate, if not you need to find the short and repair as necessary.
6. Inspect the integrity of the spring loaded positive contact insulation tab by pushing against it with your test light to see if it goes down and springs back fully to it's operating position again contact cleaner and compressed air works best to restore proper function.
7. If your bike has a lot of mileage the vibration can cause bulbs to become loose in the socket by wearing down the soldered contact thus losing spring pressure from the tab and eventually stop making contact this can be fixed by replacing the bulb or putting a drop of solder on the worn out end to ensure contact.
8. If all of your dash lights are out but are good then you most likely have a faulty connection to the dash wiring harness, inspect the connector for corroded, broken, or loose pins/sockets.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
guage lights wont light up
Headlight and instrument panel won light up
Kawasaki gpz 600 gpx 600 ninja 600 rx gpx 750 ninja 750 1985 1997 Service... zip file but it's free
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Mar 02, 2018 | 1988 kawasaki GPX 750 R

1 Answer

All turn signals not working on Kawasaki zzr1100, all other lights work. Bulbs are fine.


This could be the turn signal switch or the indicator relay. I replaced 2 relays in 6 months ,on my D1,before I bought a genuine Kawasaki one which gave me no further problems.

Jul 31, 2013 | Motorcycles

1 Answer

2000 Kawasaki ZX-9 R Ninja headlight not working


Hi, Anonymous if your headlight is not working, intermittent, only one beam works, keeps burning out, blinking, dim or surges from bright to dim to bright the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your headlight bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chafed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/low beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty headlight relay.
9. Faulty wiring between battery positive and headlight bulb socket.
10. Weak charging alternator/generator/lighting coil
11. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Zx9 headlight issue KawiForums Kawasaki Motorcycle Forums
headlight wiring loom tidy up rerouting kawasaki ninja Zx9r streetfighter...
http://serwer.robert.webd.pl:30/manual/Kawasaki_ZX_9R_(ZX900_C1,D1)_98_Service_Manual_ENG.pdf
OEM Parts for Kawasaki
Download Manual 2000 Kawasaki Ninja ZX 9R Owner Manual

Jun 04, 2012 | 2000 kawasaki ZX-9 R Ninja

1 Answer

2011 Kawasaki ZZR 1400 replace the front turn signal bulb


Hi, Frankibaby7 for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Replacing front turn signal bulb
ZX6R Right Fairing Removal Turn Signal Installation
Kawasaki ZZR1400 ABS Service Manual
OEM Parts for Kawasaki
Kawasaki ZZR1400 Owner Manual

Jul 16, 2011 | 2011 kawasaki ZZR 1400

1 Answer

2007 Kawasaki ZX-6R replace the front turn signal bulb


Hi, Glennnik for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
HowTo Turn Signal LED Bulb Installation 2013 ZX6R Forum
ZX6R Right Fairing Removal Turn Signal Installation
Kawasaki Ninja ZX 6R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


May 24, 2011 | 2007 kawasaki ZX-6R

1 Answer

How do i replace the dashboard light bulb for a 1985 el camino


you need to disconnect the speedometer then remove the 6 or 8 screws that hold the instrument panel to the dash.if its an automatic you will have to unhook the shift indicator cable from the shift colume.then pull the instrument panel out of the dash,turn the panel upside down and you will see the bulb sockets.replace all the bulbs at this time so you won`t have to do this again for another bulb.when hooking up the shift indicator cable make sure it indicates the properly selected gear when moving the shifter to each gear position.

Apr 19, 2011 | 1985 Chevrolet El Camino

2 Answers

Have installed led indicators to kawasaki zx6 2004 model now flash rate too fast


Flashing too fast indicates too much current flowing and this would point to a bad bulb or shorted socket. Maybe a grounded wire in the circuit. Check these items with a DVM....

Feb 21, 2010 | 2004 kawasaki ZX-6R

1 Answer

Kawasaki er500 right rear indicator wont work changed bulb and fuse


what right rear indicator do you mean?indicator of flasher?tail light?pls.make it clear so that i could help...if your problem is the indicator lights,it is surely attached to the batery line.Now,you can trace it by looking for the line/wire of the said bulb first,it is commonly a red wire.In vestigate it if there is a cut or pulled out wire particularly to the joints or connector.
..Second,you can check the negative line of the said light which is commonly black wire.,try to check it by simply directly attach the black wire to the body or to the crankcase of the motorcycle itself.Third,clean the bulb socket to remove rust & dirt.

Nov 26, 2009 | 2006 kawasaki ER-5

3 Answers

1994 Acura vigor gear indicator light won't light D4. All other gear indicator lights work. Happened after replacing two dash lights


WHILE REPLACEING OTHER DASH LIGHT BULBS THE JOSTLING JUST BURNT OUT THE ALREADY CLOSE TO FAILING D4 BULB.

Jun 14, 2009 | 1992 Acura Vigor

1 Answer

Red light flashing on dash panel


sounds like a short in the gage cluster remove the cover to look at the wiring and connectors.. if coroaded clean conections, also take the bulbs out clean contacts ..

Jan 28, 2009 | 1992 kawasaki GT 750

Not finding what you are looking for?
1993 kawasaki ZZR 1100 Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6446 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...