I have jinlun jl50qt-6a 2012 how do I derestristric it

Question edited for clarity and spelling, it is a 'Jinlun', not 'lum'.
Question moved for Cars and Trucks to maker category.

Made in China and generally regarded as disposable, they are $600 new. The pulse unit will be on one end of the crankshaft. Check the parts suppliers for a parts diagram, or here

https://www.yumpu.com/en/document/read/19210652/jinlun-jl50qt-5-reservedele-scootergrisen

Service Manual

https://www.google.com/search?q=jinlun+jl50qt-5-00+service+manual

https://www.google.com/search?q=jinlun+JL50QT-5-00

..

When you buy Chinese junk, you will always be stuck finding parts. :>D Some suppliers here.

https://www.google.com/search?q=Geely+scooter+JL50QT-21+parts

..

jinlun 125 manual. https://www.motorcycle-manual.com/jinlun

Hi Wade, Check the needle and seat in your carby, You need to pull your carby off and unscrew the bottom half from the top, 1st sign of a needle stuck inside the seat is a dry carby There you'll find the float, push the float up and down and see if the needle above the float slides up and down from the seat, If the needle stays up then it's stuck and NOT letting the fuel into the carby, Just pull it down with your fingers to loosen it up... I hope this helps....

If the inside is exposed, you will need to replace the entire assembly and housing. Good Luck

And your question is?

The battery is the key. The starters are pretty durable so make sure you a using a charged attery with good contacts. Also, check the fuses, you may have a blown fuse that wil prevent you from turning the starter.