Question about Motorcycles

Open Question

Voltage regulator wire diagram on a 2003 Honda 900rr

Posted by Anonymous on

Ad

5 Related Answers

Anonymous

SOURCE: 1988 Honda si Alternator Problem

how do I remove a alternator from a 19988 honda accord?

Posted on Aug 20, 2008

Ad

Anonymous

  • 30 Answers

SOURCE: wiring diagram for body mount voltage regulator

http://www.ncttora.com/fsm/1993/index.html

Posted on Aug 08, 2009

Ad
co7196

Ned C Cook

  • 3433 Answers

SOURCE: I have a 1974 vw beetle. I got a worldwide

Alternators don't have external regulators. If you need a regulator, You need a better brand alternator Good Luck,Ned

Posted on Sep 13, 2009

Anonymous

  • 42 Answers

SOURCE: i need a wiring diagram for a voltage regulator on

My dealer burns me a copy of service manuals onto CD for $20. Check with yours to see if you can receive the same.

Posted on Aug 30, 2010

heimlich

David Belcher

  • 1978 Answers

SOURCE: I have a 95 900rr

To check the stator, you should have continuity between all three yellow wires and no continuity between any yellow wires and ground. If the stator tests good you probably need the regulator/rectifier.

Posted on Sep 04, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 95 900rr and it died on my put new batter in and rode till battary died again then looke and saw burnt wires from the statot to the rr regulator replaced wires and still have same problem would it...


To check the stator, you should have continuity between all three yellow wires and no continuity between any yellow wires and ground. If the stator tests good you probably need the regulator/rectifier.

Sep 03, 2010 | Honda CBR 900 RR Fireblade Motorcycles

1 Answer

92 model Honda fireblade 900 wiring diagram needed


94 cbr 900rr starter relay keeps popping the 30 amp fuse. changed out the entire wiring harness and change the the starter relay, and its still doing it, the voltage regulator was getting hot then blowing the fuse, thats been changed but its still doing it

Mar 16, 2009 | 1994 Honda CBR 900 RR Fireblade

1 Answer

Honda S2000 engine installed in kit car. How do I wire alternator


Unfortunately the Honda alternator is regulated by the ECU, which allows the ECU to intelligently reduce alternator engine loading to improve fuel consumption. The intelligent system uses an electrical load detector (ELD) located near the battery to control the alternator output voltage. A two wire alternator has an inbuilt regulator that will always generate the required charging voltage. When a battery is fully charged and the electrical loading is low there is no need for generating the charging voltage, in this situation the honda alternator will reduce the output voltage to reduce engine loading, hence improved fuel economy.

Jan 29, 2009 | 2003 Honda S2000

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6480 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...