Will quit shift into neutral will start but when you come to a stop then engine won't stay running you let the van sit for 2.5 hrs it starts no problem until the next time can this be the coil I chan
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sounds like a possible shift linkage problem. Follow linkage back from your transmission, look for bent levers, broken or bound up pivoting connections. The neutral start switch prevents starting of engine when transmission is not in neutral or park.
might be a burned spot on the starter contacts where the brushes power the motor. tap the starter to see if problem goes away. sometimes you can clean the contacts but that is a temporary fix.
Yes this would be a transmission neutral safety switch problem. the switch sit over the post that the shift cable attaches to on the ****** case. Picture below.
It is possible that it is coincidence. Check if after revving it would stall after when your truck is in neutral or in park. This is to isolate the problem if it is the engine when in load or the transmission.
Is this a manual transmission? If there are shifting issues it may be the clutch. Other than that have the fuel pressure tested. The fuel regulator may be faulty or there are leaks or bad lines on the vacuum hoses.
you need to replace the neutral starting switch on the transmission,it is a screw in type and has a connector with three wires on it,or start your van in neutral.
I am having the same problem... My solution was to check for pending trouble codes, which is a sensor about to go out... Mine was a crankshaft sensor b trouble code PO385 and PO356.. You might want to check it out...I have 80,000 mile today also 03 deville V8 4.6
×