Question about Motorcycles
Posted by Anonymous on
The only idea that i can come up with is that you dont have a good ground..or the guage was bad when you bought it..i hope this..Keith
Posted on Jul 02, 2009
main thing befor you drill the mounting hole, make sure its in the middle and the right spot. i did many accurate mods on harleys for ppl because you need a good eye, which most deaalerships dont have. place tape on fender, measure, mark, measure again then drill small hole, check, if good drill full size, if of , drag hole then drill.
Posted on Aug 15, 2009
there is 2 bolts on the caliper take them off and there are pad pins that need to be taken out.. inside the caliper there is a metal clip where the pad sits in.. put them in the same way they came out once you start its pretty self explainatory.. you should not have to blead them
Posted on Aug 30, 2009
Tips for a great answer:
Oct 31, 2011 | 2006 Harley Davidson XL 1200 C Sportster...
Dec 29, 2009 | 2006 Harley Davidson XL 1200 C Sportster...
Aug 20, 2009 | 2006 Harley Davidson XL 1200 C Sportster...
Apr 17, 2009 | 2006 Harley Davidson XL 1200 C Sportster...
66 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: