SOURCE: horsepower
horsepower is 178. The US spec version of the 2008 1000RR has a limitation above 10,200 rpm that reduces rear wheel horsepower to approximately 155. The UK version of the motorcycle makes about 10 more horsepower with a normal curve above 10,200 rpm as opposed to the US version which is essentially flat from 10,200 rpm to 13,000 rpm.
SOURCE: Rebuilding a Honda 2004 CBR 1000 RR Engine I just
Hi Paul,
You can download a copy of the entire manual, torque setting, head stud pattern, and every other usefulbit of info from here. Godd luck with the rebuild, let me know if you have any dramas with the manual. Cheers.
regards
robotek
SOURCE: my 2004 honda cbr 1000rr has a loud rattle and i
Needing new valves is highly unlikely. Your bike is only 5 years old.
Before doing anything else, run through a tank of premium gas. If the rattle goes away then a bit of pre-ignition was present. If the rattle is still there, take the bike to a dealer and ask them to reset the cam chain tensioner and set the valve clearances also. This may cost $150 or so. Chances are that if the knocking is still present, you are hearing piston slap. This would require new pistons, rings and probably fresh cylinder bores. Have the shop re-seat the valves while the top end is torn down. Ask the dealer as to cost before handing over the bike.
526 views
Usually answered in minutes!
×