Motorcycles Logo

Related Topics:

A
Anonymous Posted on Jun 13, 2013

Boss hoss 350 2001 forks leaking oil how to brake down to fix to replace seal or packing

5 Related Answers

kwd27

  • 6 Answers
  • Posted on Dec 30, 2008

SOURCE: front fork leaking oil from bottom of the seal.

This is one of the few things that I recommend you take to a shop - you need some very special tools and techniques to fix this problem. Sorry,
Kevin

Ad

Anonymous

  • 74 Answers
  • Posted on Jan 16, 2009

SOURCE: Fork oil level: 2006 KDX 200

This all depends on what size forks you have, but a good rule of thumb is 120ml. After that then what you want to do is to ride the bike and make adjustments to your front end until your liking.

Anonymous

  • 132 Answers
  • Posted on Apr 28, 2009

SOURCE: how to replace fork dust and oil seals on a kx125

i would do the same as the other post has said, but i would use the old seal to drive the new seal in with a rubber mallet that way you cant damage the fork.

Anonymous

  • 53 Answers
  • Posted on May 17, 2009

SOURCE: front fork leaking oil from bottom of the seal.

change the oil seals and oil in the fork,and avoid wheelies on the bike and off road biking 

Anonymous

  • 26 Answers
  • Posted on Aug 29, 2009

SOURCE: 2000 buell m2 cyclone leaking fork seals

Check out badweatherbikers.com and I am sure you will find everything you want about working on your Buell. Good luck

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1997 Boss Hoss motorcycle. Why is the transmission leaking in back of the pulley on my bike?

You own a motorcycle with a car engine in it. Rear Transmission seals are known to weep because they dry out and shrink. You can try some seal re-conditioner.


https://www.google.com/search?q=1997+Boss+Hoss+motorcycle.+Why+is+the+transmission+leaking

GM/AC Delco Automatic Transmission Seal Conditioner ...

Pace Performance https://paceperformance.com > i-6485855-88861314-...

Softens and swells seal to prevent minor leaks. Compatible with all Dexron series ATF. Provides a cleansing action to maintain clear passages.

..
0helpful
2answers

Why is the output shaft seal leaking on my 1997 boss hoss and how do i repair it

If the oild seal dried out and got worn, it will leak.
On my 1965 Harley, I had the same issue. Turned out to be the needle bearing was worn, the play let the seal wear and oil.
New bearing and oil seal cured mine.
0helpful
1answer

Fork oil tube

toop of tubes un thread need to no how much so you dont add to much
0helpful
1answer

98 yzf 600R..Right fork leaking. Problem and fix?

it sounds like your fork seal has failed,it wont affect your brakes but will make your front suspension feel a wee bit "soggy"and will affect your handling,i would suggest getting the seal replaced as evetually the oil from the faulty seal will contaminate your brake pads that will affect your braking performance,replacing the seal,sooner rather than later ,would be a wise move..hope this helps...cheers
0helpful
2answers

2004 honda shadow 600 VLX leaking fork seal bike has 600 miles on it should I replace left and right if only right is leaking.

check first to see if the leaking fork has any rust pitting on the chrome,if it has and its a very small blemish then fettle it off first,and just replace the leaking seal,as the saying goes..if it aint broke dont fix it,if the seals had been in the forks for years and the bike not used then consider replacing both..
Not finding what you are looking for?

568 views

Ask a Question

Usually answered in minutes!

Top Boss Hoss Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66931 Answers

Larry Ng
Larry Ng

Level 3 Expert

14585 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39381 Answers

Are you a Boss Hoss Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...