How much oil goes in the fork in a 2004 yz250?
SOURCE: whats the factory spec on a 03 yz250 fork oil
You can get a free service manual at
http://www.yamaha-motor-europe.com/community/service/manuals.jsp
It will have the spec in it.....I am guessing S1
SOURCE: ho do you change the fork seals on a 97 yz250 ?
It's not that easy. You really need a manual to assist. Also, the fork oil level is specific, and you need to measure it by cc's or by millimeters, according to the specs.
Also...the seals need to be installed with a drive that's made for your fork size.
I recommend a good manual, as the factory one is the best.
Adding up cost of tools also may warrant taking it to a professional.
SOURCE: Yamaha xj 900 s Front fork oil amount in cm
The forks hold 286ml or 9.67 US OZ of oil, best would be to use hydraulic oil.
Good Luck.
SOURCE: i need to know if i can add fork oil to my 03 yz25...
Yes. Unscrew the fork caps one at a time and push the front end down just enough to get a turkey baster or syringe to the inside. Unless you've lost alot of fluid, just add in 10cc increments. If you get too much in them, the forks will get really stiff.
*Help me out. Rate me!
SOURCE: How much oil do i put in my 2004 yamaha yz250 2
35 to 1 for fuel oil mix. if u r talking about crank case, i think 2 quarts, if there is a sight glass on side of cover, it should be right in center when bike is upright. If no sight and no leaks, just measure what you take out an add the exact same.
320 views
Usually answered in minutes!
×