Question about 2013 BMW F 700 GS

Open Question

Gearbox klunk when shifting

Pull in clutch, move shift lever to 1st gear. klunk or hard shift occurs, other gears half hard shift. is this normal

Posted by Anonymous on

Ad

5 Related Answers

Anonymous

  • 60 Answers

SOURCE: BMW E36 Auto gear lever

its a bit fidly , ther is a screw under the plastick trim on the gear knob its self and then it should fall apart from ther .. you should be able to get a new one cheep from bmw . or fix yor self as all it will be is the spring has gone . sorry i cant be a bit more help but its hard to explain , but easy .

Posted on May 04, 2009

Ad

SOURCE: transmission won't shift to 2nd and 3rd gears goes from 1st to 4th.

Doesn't sound like a simple fix. I would suggest having it serviced.

Posted on May 05, 2009

Ad
darkoh69

danny

  • 77 Answers

SOURCE: My gearing is causing me headaches, mostly in and

Check the leaver is not loose, then try adjusting the gear leaver down a notch or two helped for me.

Posted on Jul 13, 2009

Mike Gilbreath

  • 50 Answers

SOURCE: engine seems to be lumpy at times and a bit of a

Go to IBMWRA tech page , both these problems are addressed there. The gear switch in the tranny is bad and the throttle problem can be several things, TPS out of adj or TB's need syncing usually the case. Change the plugs to the Autolite numbers shown on the tech page.

Posted on Oct 08, 2009

Anonymous

  • 136 Answers

SOURCE: 1994 325 BMW shifting from 1st - 2nd gear is hard

unfortunately yes it does.its sounds like your 2nd gear synchro is out.unfortunately your tranny needs to come out to fix it.does it only between 1-2? or other gears? if all gears your cutch is goin but just between 2 specific gears a synchro times the gear teeth so they lock in and its off and teeth on the gears are the grinding you are hearing.sorry to have to tell yah that one.i always loved my old 325 is model always fun to drive.

Posted on Nov 24, 2009

Testimonial: "quick and informed thanks"

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 toyota Camry manual hard shifting from 1st to 2nd gear


With the engine off see if the shift between 1st to 2nd feel,s free if not it could be the cable check the clutch is disengageing all the way it should go into reverse without crunching,other then that it could be a synchro ring worn check that the gearbox has the right oil in it.

Dec 20, 2015 | 2008 Toyota Camry

2 Answers

Fix gear shift


drain your gearbox oil and also please check the clutch plates for the bike and also let me know what mileage you are getting .

Mar 26, 2014 | Bajaj Pulsar 150 Motorcycles

1 Answer

Hi, I have Audi A3 Cabriolet manual gearbox. I was on the queue to work the car was on 1st gear, when I released the clutch I heard the funny noise like something knocked. Then from there I could not feel...


sounds like your shifting cable might of come off check and see if its still hooked up to the transmission just follow where it comes down from the stick shift into the tranny. hope this helps

Sep 11, 2013 | Cars & Trucks

1 Answer

Yamaha stuck in 1st gear


I would be checking the cable and clutch adjustment first as if the clutch is not completely disengaging then the gear shift problem occurs

Jun 25, 2013 | Yamaha Motorcycles

1 Answer

I need 2,3 & 4 gear for Yamaha 1100 special 1982 model


Instructions
    • 1 The gears on a motorcycle run in this order: first, neutral, second, third, fourth and fifth. When you are moving, shifting up from first gear will skip over neutral and shift you right into second gear. The only time that shifting up from first will get you into neutral is when you are not moving.
    • 2 Pull in the clutch lever and tap the gear lever down until it stops. This will signify first gear. Pressing the gear lever down will shift you down one step and pressing it up will shift up one step.
    • 3 Tap the gear lever up one click while still holding in the clutch. This will put the bike into neutral.
    • 4 Start the bike. The bike needs to be in neutral to start.
    • 5 Hold in the clutch lever and tap the shifting lever down to shift to first gear.
    • 6 Release the clutch slowly and give it just enough gas to get moving.
    • 7 Listen to the motor to know when you need to shift. If the engine is making a low grumbling noise, then it will need to be shifted down. If it is making a high squealing noise, then it needs to be shifted up.

Jan 15, 2013 | Motorcycles

1 Answer

Where can I find 2/3 & 4th gears for Yamaha XJ special 1982 model.


Instructions

1

The gears on a motorcycle run in this order: first, neutral, second, third, fourth and fifth. When you are moving, shifting up from first gear will skip over neutral and shift you right into second gear. The only time that shifting up from first will get you into neutral is when you are not moving.
2

Pull in the clutch lever and tap the gear lever down until it stops. This will signify first gear. Pressing the gear lever down will shift you down one step and pressing it up will shift up one step.

3

Tap the gear lever up one click while still holding in the clutch. This will put the bike into neutral.
4

Start the bike. The bike needs to be in neutral to start.
5

Hold in the clutch lever and tap the shifting lever down to shift to first gear.
6

Release the clutch slowly and give it just enough gas to get moving.
7

Listen to the motor to know when you need to shift. If the engine is making a low grumbling noise, then it will need to be shifted down. If it is making a high squealing noise, then it needs to be shifted up.

Jan 15, 2013 | Motorcycles

4 Answers

HOW DO I SHIFT A 2003 KX 250


pull your clutch in on the left handlebar push the shifter lever down and let you clutch out slowly while giveing the bike a lil bit of gas. But if you don't know how to ride i wouldn't be jumping on a kx 250

Sep 20, 2009 | 2003 kawasaki KX 250

2 Answers

1st gear hard to find


You have a shift fork with just a slight bend in it. The problem will only get worse. Sorry about that.

Pleas rate this solution. Thanks!

Mar 30, 2009 | 2004 BMW R 1150 RT (ABS)

1 Answer

Mitsibishi colt 97 stuck in 1st gear


Your link broke off. What might have happened is the car got stuck in 1st, and when you shifted to second, the link broke. Not too clued up on your car, but you probably need to drop the gearbox. On some cars you can take out the shifter without having to drop the box and still see if the link is broken. Good luck

Mar 18, 2009 | 2006 Mitsubishi Colt

Not finding what you are looking for?
2013 BMW F 700 GS Logo

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6495 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...