Question about 2009 Genuine Scooter Roughhouse R50

1 Answer

Replace the ignition switch 2009 Genuine Scooter Roughhouse R50

Need to buy new ignition @

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Genuine Master
  • 59,350 Answers

Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Genuine, despair not, for a mere zero $ you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.ebay.com/b/Scooter-Parts-Accessories-for-Genuine-Scooter-Co-Roughhouse-50/84149/bn_51092610
https://www.youtube.com/watch?v=WXxZVYyd-Ek
http://www.epfguzzi.com/scooterpunks/manuals/index.html
https://www.scootertuning.ca/en/3005-genuine-roughhouse-50?gclid=EAIaIQobChMI58Pbz_nb5QIV04NaBR0gggKvEAAYASAAEgK5yPD_BwE
https://absolutelyscooters.net/pdf/CGEN_dawg_scooter_manual.pdf

Posted on Nov 09, 2019

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore model 106.54582400 not cooling after move.


Igniters are brittle because they are made of crystal... so if it got dropped or handled roughly, I would be looking at the igniter first... Dryer Igniter 4391996
Watch the video below...

Nov 01, 2016 | Kenmore Refrigerators

1 Answer

I need a new ignition for my kymco xciting 500


Hi, Phillip for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Motorcycle Electrical Ignition for KYMCO
Kymco Scooter Parts ATVs Scooter Parts Performance Scooter Parts...
http://www.kymcousa.com/owners/onroad/Xciting250-500_pre2008.pdf
https://absolutelyscooters.net/manuals/Kymco_Xciting_500_Service_Manual.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Sep 07, 2016 | 2007 Kymco Xciting 500 i

1 Answer

I need to know where the green wire is supposed to connect to the ignition or if it doesnt connect to anything


I this is a older EMC Rascal with the cast aluminium housing, green goes to the bat Terminal. There should be only one wire on it(bat) connection. Scooter Doctor App

I’m happy to assist further over the phone at https://www.6ya.com/expert/bill_bcbb89783b08c489

Mar 30, 2016 | Health & Beauty

2 Answers

Where is the battery in a rough house 50 scooter ?


While I don't own a Roughhouse, I have owned a couple other Chinese made scooters. There is a very good chance the battery is located under the floorboard of the bike. I looked at a few photos of the scooter online ad it looks like there is a small door in the middle of the floorboard. I believe they like to put the batteries low on these bikes to help keep the center of gravity low.

Good luck.

Nov 10, 2013 | 2008 Genuine Scooter Roughhouse R50

1 Answer

Where can i find my servide code for my 2007 aprilia sr50?


i have lost my keys for my aprillia sr 50 factory i have taken the ignition off and i have been left with a switch i turned it on and my ignition on and now it is asking me for the code if i buy an new ignition will this code go away and will my bike start

Sep 15, 2012 | 2008 Aprilia SX 125

1 Answer

Put in new batteries and scooter will not do anything


It could that your potentiomenter is broken and would need to be replaced. simply removed the housings from both sides to get to the throttle part and check to see if the spring is not broken. if it is broken, simply remove old one and buy new one which should be around 60.00 and up in cost. can go to this website to check
http://www.monsterscooterparts.com/mobility-scooter-throttle-pot.html

May 10, 2012 | Shoprider Mobility Products, Inc. Hero...

1 Answer

How do i remove an ignition in a gmc jimmy 2000 without a key?


Hello, Dan. First, disconnect the negative (-)/ground on the battery Dan are you mechanically inclined. If not then don't attempted this job.

You will need to remove all the plastic covers on the steering column. Remove the horn ring.--two screws under the steering wheel. Remove the horn ring and disconnect the horn plug. Remove the steering wheel nut. Use a steering wheel puller to remove the steering wheel.

Remove the turn signal switch that fit around the upper part of the steering column. Then remove the some of the parts that are associated with the steering wheel and/or column.

Now, look at the ignition switch flange, it a big chunk of aluminum. Now look for a large aluminum dowel pin 5/8" in diameter that is driven into the chuck of aluminum but it is parallel to the steering column.

This aluminum dowel pin will have to be drill out before you can get ignition housing off, If there is adjustable steering column lever, remove this also.

Now, once the dowel pin has been removed, looking for a **** in the ignition housing. Take chisel and insert into this ****, drive the chisel into the **** until the ignition housing is loose to be remove by sliding it up over the steering column.

If you buy a new ignition switch, on purchase the switch with keys. Don't buy the hole new ignition housing.. If you do it will get expensive.

In the ignition (old) housing drive out the ignition switch pins that keeps the ignition switch in the housing. Install the new ignition switch re-insert the ignition switch hold pins.

I am fairly sure that Carquest/ NAPA some other larger auto parts will have ignition housing bolt. If they try to sell you a replacement aluminum dowel pin don't buy it. It is almost impossible to install the aluminum dowel pin without the proper tools, so use a bolt to squeeze ignition housing together.

Before putting everything back together. Now, check the new ignition switch to make sure it works. I wish you lot of luck. GB...stewbison

Sep 27, 2011 | 2000 GMC Jimmy

2 Answers

Have a power scooter with no key to start the power. chair


an electric scooter company can fit a new barrel for around $ 40

Oct 14, 2010 | Electric Health & Beauty

2 Answers

Need new battery for echo 3 scooter


I have never heard of the echo, but there are several sites on the internet that sell scooter batteries. You can also buy your batteries direct from shoprider.com at this link

The batteries are about $70 each, and there are two of them in the pack.

Nov 22, 2008 | Echo 3 TE SL7 3 New Electric Scooter by...

Not finding what you are looking for?
2009 Genuine Scooter Roughhouse R50 Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Genuine Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5954 Answers

ANTISPAMMER

Level 3 Expert

33381 Answers

Are you a Genuine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...