1997 Honda CBR 900 RR Fireblade Logo

Related Topics:

Question about 1997 Honda CBR 900 RR Fireblade

3 Answers

Honda cbr900rr transmission , slipping out of 2nd gear into neutral, does engine need to be pulled apart to get to gearbox

Posted by jayson_2008 on

Add Your Answer
  • tombones May 11, 2010

    DOUG > What's the deal? You cut the cog lead edges? At an inward angle to the slider core to encourage less chance of disengaging? Is this what you are talking about?

×

3 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.
    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Hi Jason..

I had exact same problem.. bottom line I had to replace selector forks (all three) and second gear cog.. If u do replace a gear cog then please take a tip from me (lesson hard learn't). Have all your gears undercut at the same time or it will slip out of another gear.. I got my bike back after 2 nd gear done and on the same day 3 rd gear started to slip. Had to send bike back and have all the cogs undercut... Now its fine.

And yes u do need to remove motor to open gearbox and u will need to replace gaskets..

Doug

Posted on Apr 09, 2009

Anonymous

  • Level 1:

    An expert who has achieved level 1.
    Corporal:

    An expert that has over 10 points.
    Mayor:

    An expert whose answer got voted for 2 times.
    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Yes pull it for best results sounds like you have a bent shift fork

Posted on Mar 04, 2009

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I found this site:
http://www.aperaceparts.com/transmissions.html
hope this helps, I have to do the same thing- only had the bike for 3 days:(

Posted on Aug 01, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

I have Honda V65 magna motorcycle it pops out of second gear
The reason for that problem is damage to the drive dogs on the 2nd drive and driven gear.they have 90° edges on them and if they wear (usually from bad gear changes) they throw each other apart and shoot out to neutral in the case of 2nd.so there clarify to fix it you need to be able the engine out and split the cases to get the gearbox out and change the damaged gears.
Read full answer
Mar 16, 2015 • 1983 Honda VF 1100 C
0helpful
1answer

Honda 1998 v6 engine automatic transmission slips out of 2nd,3d, goes in 4th if go to neutral and back to 4th at 30mph okay till slows up and drop out of 4th gear
Pull the transaxle & rebuild it or install a reman

Can't fix slipping
Read full answer
Sep 06, 2014 • Cars & Trucks
0answers

1997 Honda CBR 900 RR Fireblade clutch slips in 3rd gear
Read full answer
Be the first to answer Apr 09, 2014 • 1997 Honda CBR 900 RR Fireblade
0helpful
1answer

Gear shifting problems in Honda Prelude with Automatic transmission only when gearbox is cold
While just change ATF oil or CVT oil in transmission & old filter too. your car problem will be solve....
Read full answer
Nov 21, 2013 • 1998 Honda Prelude
0helpful
1answer

1st to 2nd Gear Engagement Issue
bent selector fork on the gearbox, and that would be a full engine strip no doubt about it, any more use of it will cause a screwed gearbox and thats mega money!

get it to a mechanic or buy a haynes/clymer manual to help.
Read full answer
Sep 27, 2012 • 2006 Harley Davidson FXDWGI Dyna Wide...
0answers

1999 Honda CBR 900 RR Fireblade 6th gear shuddering
Read full answer
Be the first to answer May 07, 2012 • 1999 Honda CBR 900 RR Fireblade
0answers

Why Does my 1997 CBR900RR Fireblade not idle when the side stand is down unless I hold the clutch in
Read full answer
Be the first to answer Jan 30, 2012 • 1997 Honda CBR 900 RR Fireblade
1helpful
1answer

I just bought a 86 kdx 80 and it won't shift past 2nd gear. i have only 1st neutral and 2nd... I need help. know nothing about working on bikes.
Hi, sounds like your gearbox needs pulling apart, not something i would recommend doing yourself, it can get very messy!!
Read full answer
Feb 14, 2011 • kawasaki KDX 125 Motorcycles
5helpful
3answers

What does it mean when an automatic transmission slips gears?
hello. Here are some of the transmission slipping signs you should be looking for:
  • A delay of more than a second in shifting from the neutral to drive or reverse gear, could mean that there is a problem with the transmission. If on changing from a neutral or park position to the drive or reverse gear, the car does not immediately catch the gear and move forward or backward, then it could mean a problem in the transmission.
  • If you change gears, and you hear a sudden clunk or sudden jolt or shudder, then the shifting is not smooth and there could be a problem with the gearbox.
  • If the engine rpm keeps increasing but there is no increase in the speed, then it could be a sign of the transmission slipping.
  • Another one of the transmission slipping signs is oil or automatic transmission fluid (ATF) leakage. This could damage the transmission.
  • If your car has suddenly started sounding noisy, then it could also be because of a problem in the gearbox.
  • Most automatic transmission systems, nowadays, have a check engine light or an OD light, which flashes if there is a problem with the engine. You will need a code reader to diagnose the problem by reading the code.
Read full answer
Jan 25, 2010 • 1998 Honda Accord
2helpful
2answers

Prelude 2.2 vti W reg auto automatic tiptronic gearbox slipping
Hi there. Although the Dealer has changed the oil, did they do a 'Stall Test' whilst the gearbox was cold and again when at normal running temperture? If not, that's what they must do firstly. This will identify whether you have a slipping clutch/s. The Honda autobox also includes what is known as accumulators - these control how each clutch is engaged during acceleration. For example, if you are accelerating slighly/smoothly, you want each gear to be engaged gently and smoothly, whereas, when accelerating hard, you need the gear engaged quickly and hard to aviod clutch slippage. Thus, the fact that you are experiencing a hard engagement might mean that an accumulator/s is seized. If that's the case, it will mean that the autobox will need stripping, cleaning and be checked for worn components. Hope this helps, Scottech.
Read full answer
Apr 21, 2009 • 2000 Honda Prelude
Not finding what you are looking for?

View Most Popular

1997 CBR 900 RR Fireblade

  • Motorcycles

Related Question

I have Honda V65 magna motorcycle it pops out of second gear

  • 1983 Honda VF 1100 C

Open Questions:

0answers

1997 Honda CBR 900 RR Fireblade clutch slips in 3rd gear clutch basket looks fine clutches were stuck together and the bike slips only in 3rd gear
Read full answer
Be the first to answer Apr 09, 2014 • 1997 Honda CBR 900 RR Fireblade
0answers

honda CBR 900 odometer stop working the odometer is not reading
Read full answer
Be the first to answer Apr 05, 2014 • 1997 Honda CBR 900 RR Fireblade
0answers

what causes cbr 900 rr fireblade 1997 to be hot
Read full answer
Be the first to answer Apr 05, 2014 • 1997 Honda CBR 900 RR Fireblade
0answers

what kind of coolant do i put in my 97 cbr900rr my coolant is completely empty and i have no clue what kind to put in it
Read full answer
Be the first to answer Dec 21, 2012 • 1997 Honda CBR 900 RR Fireblade

See all 1997 Honda CBR 900 RR Fireblade Questions

Related Topics

1,978 views

Ask a Question

Usually answered in minutes!

Popular Questions

Cbr 900 wiring diagram with

1994 Honda CBR 900 RR Fireblade

Ignition wire diagram for 1999 honda cbr 900rr

1999 Honda CBR 900 RR Fireblade

Neutral light stays on when bike is in gear

1997 Honda CBR 900 RR Fireblade

92 model Honda fireblade 900 wiring diagram

1994 Honda CBR 900 RR Fireblade

Oil and filter change on honda cbr 900 fireblade

1996 Honda CBR 900 RR Fireblade

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7336 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

Mike

Level 3 Expert

4383 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...