Question about 2006 Kymco Xciting 250

1 Answer

Lost my Kymco ignition shutter key. Any easy fix to get that shutter open?

I bought my scooter used and it did not come with an ignition shutter key. If it cannot be replaced, any easy way to get that shutter open?

Posted by idahomtnman on


1 Answer

joe goulet

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.


    An expert who has answered 20 questions.

  • Contributor
  • 32 Answers

You can get keys at

Posted on Oct 13, 2017


2 Related Answers


  • 9 Answers

SOURCE: My kymco scooter willnot run. It acts like no gas to the carborator. Can someone please help.

Check that your fuel pump is working.

Posted on Sep 07, 2017


Steve P

  • 3712 Answers

SOURCE: How do you clean the car orator on a Kymco scooter?

Hey Tammy,
I hope you mean carburetor -- Motorcycle carburetors have numerous tiny passages, screws that need to be removed to access some of these tiny passages, jets that need cleaning, etc.
This is NOT a job for a shade tree mechanic.. Any good motorcycle dealership SHOULD have a mechanic that can clean and set your carburetor..regardless of make!!

Posted on Sep 07, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How can I open the shutter feature under ignition of my scooter Honda Metropolitan 2015

there is a shape on the side of the key that fits in the bottom part. If you line up the bump with the slot the right way, and turn it, the shutter will open

May 06, 2016 | Honda Cars & Trucks

1 Answer

A key broke off in the ignition of our handicap motorized scooter

This is a common issue with the travel scooters. It is usually an easy fix without having to replace the key-switch.
You need the following tools:
Good eyesight and / or good glasses to see down inside the key switch. A strong, thin needle. A jewelers flat screwdriver or eyeglass screwdriver.
The broken key inside the switch will have a flat back and a toothed topped. The toothed side moves a series of spring loaded pins inside the lock.
With the switch turned to the off position...
Place the jewelers screwdriver down inside the switch where the key's teeth are, pushing back the spring pins, and getting leverage under one of the teeth to lift the key out.
The needle is used to release friction and back pressure off the key back against the switch housing.
Work it carefully and be patient.
Once the key piece is out try ebay for a replacement if needed.
A common key number for Pride scooters is the A126

Oct 28, 2013 | Electric Mobility Health & Beauty

1 Answer

Ignition is loose

sounds like a loose or damage ignition, if you are happy to get your hands dirty, it should be easy to fix / replace as needed, first thing you need to try is poping a small amount of WD40 in to the ignition key socket, this some times loosens the internal components with luck that will sort it. if not then look to see if you can find the screws / bolts that hold the cover in place, if you can then just open up, there will be a nut on the underside of the ignition that is probably loose, tighten that first, then check all leads are secure if not tighten / re solder or crimp on new connection. test to see if problem resolved, if so fine put back together and off you go, if not then you will need to take out the ignition and order a replacement, there should be product info sticker on it, i would check eBay for a generic ignition (much cheaper) once you have replacement install and of you go.

Sep 07, 2013 | Harmar AL100 Universal Scooter Lift

1 Answer

Benelli pepe engine doesn't switch off

Hi Perth1000, you may need a new ignition switch and I am sorry you can't find the first and best tool you ever bought for your Benelli but despair not for a mere $0 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
honda scooter elite 110 ignition replacement
Ignition Switch Wires HELP Honda Elite 250
Replacing ignition switch BMW motorcycle
Benelli Pepe 50 2008 service manual DOWNLOAD FREE FULLMANUALS COM

Btw, I’m available to help over the phone in case u need at

Mar 16, 2013 | 2008 Benelli Pepe 50

1 Answer

How to open seat on sachs scooter

Tryi this it may help
  • 1

    Make sure the vehicle is balanced on the centerstand. The centerstand is a metal bracket located in the middle on the bottom of the scooter. Engaging it means that the scooter is resting on the front tire and centerstand. The rear tire is raised slightly off the ground.

  • 2

    Insert your ignition key into the main ignition switch. The switch is located on the inside front of the scooter just to the right of center and below the handlebars.

  • 3

    Twist the key to the left, or counterclockwise, to the position on the switch marked Open. If the scooter is not in the locked position, turn the key to the first Open position. If the scooter is in the locked position, turn the key to the second Open position. In either case, turn the key counterclockwise one notch to the respective Open position. The Yamaha Vino Scooter Owner's Manual cautions you that you should not push down on the key while turning to the Open position.

  • 4

    Grasp the end of the seat nearest the front wheel and pull it upward to raise it on the hinges located at the rear. Now you can store or retrieve items from the storage compartment

  • Nov 27, 2012 | Sachs Motorcycles

    1 Answer

    Lost keys & I need to remove ignition switch on Kymco agility50 scooter 2007

    oh my freaking god, no one is of help here.

    fellow kymco owner here, id start off by looking for a locksmith to make up a key for you. they typically just break into the key lock, pull out the cylinder, and use the pins to aid in cutting a key. as soon as that is done, they will have a key done for you without destroying your locks. then as soon as your done, ask them to make 2 extra copies of your key and keep them spare somewhere. i keep one in my wallet, but the key head cut down smaller, and the other at home.

    i hope this answers your question.

    source: this has happened too many times...

    Jul 17, 2012 | 2007 Kymco Agility 50

    2 Answers

    Have a power scooter with no key to start the power. chair

    an electric scooter company can fit a new barrel for around $ 40

    Oct 14, 2010 | Electric Health & Beauty

    Not finding what you are looking for?
    2006 Kymco Xciting 250 Logo

    Related Topics:

    443 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Kymco Experts


    Level 3 Expert

    85239 Answers

    Muntejaya Ginting
    Muntejaya Ginting

    Level 3 Expert

    10422 Answers

    Arnie Burke
    Arnie Burke

    Level 3 Expert

    6418 Answers

    Are you a Kymco Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides