Question about 1997 kawasaki ZX-9R Ninja

Open Question

1997 Kawasaki ZX-9R Ninja gauges not working

I have 1997 zx9b4 the temp and fuel gauges are not working. any ideas @

Posted by Anonymous on

Ad

5 Related Answers

tombones

  • 3567 Answers

SOURCE: My fuel pump does not feel like its working. Can I

Google " motorcycle salvage suzuki " You can get a good used one for a lot less than new.

Posted on Apr 18, 2009

Ad
alex_salve

ALEX SALVE

  • 78 Answers

SOURCE: how do i tighten chain on 1994 kawasaki ninja

go to service center

Posted on May 17, 2009

Ad

Anonymous

  • 1 Answer

SOURCE: how do i put my 08 kawasaki ninja zx-6r back

First, put some masking tape on newly painted parts, then carefully and slowly figure out what parts cam off last, these will go on first. Be very patient here, you spent all this time to make it look new, dont negate that by getting in a hury. If you are not sure of some parts, look at manuals or the internet to get picks of how it all fits. Or slowly test fit each part tto see if its right. This is common sence but if you took pics before, and made diagrams or each part coming off , this would be easier but its still not that difficult if you work slow and dont make a short deadline. Take time to think about how each part goes back on. You may need to get some new bolts and nuts in areas that are missing some, check regular bolt supply stores for the proper metric fasteners. Hope this helps!!!

Posted on Nov 08, 2009

pugwash814

paul crocombe

  • 377 Answers

SOURCE: 01 Ninja zx-9r wiring diagram request

http://www.carlsalter.com/motorcycle-manuals.asp

this site has a manual that you can use, put the new loom next to the old and install as you unplug the old,

good luck

Posted on Nov 15, 2009

Anonymous

  • 3 Answers

SOURCE: what kind of oil does

I use a synthetic 10/30 in my 94 ninja.

Posted on Sep 08, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 plymouth breeze speedometer,tach gauge,temp gauge,brake lights, dont work.


circuitry behind the gauge panel. you will have to pull the dash to see behind there and track the problem down

Nov 28, 2013 | 1997 Plymouth Breeze

1 Answer

On a 1997 BMW Z3, several electrical thimgs quit wotking all at once. My brake lights quit working, all the onboard computer functions such as clock, temp, mpg, etc., the fuel gauge went to full empty with...


German cars are weird. Changing a battery can disable many things. It will have to be reset by computer. Don't be surprised if you have to go to the stealer dealer for that.

May 29, 2017 | 1997 BMW Z3 Roadster

1 Answer

I have a 2000 John Deere 990. The fuel gauge and temp gauge only work part time but always together.Any ideas?


I have owned a 990 since new. 2001. The fuel gauge started to act similar to what you described for a few years. Recently the temp gauge was also doing the same thing. I finally decided to chase the problem. Bought a PDF file of John Deere manual. The fuel and temp gauges share a common ground. I tool the hood and panels off that allow getting behind the instrument panel. ps, you don't need to pull the steering wheel. NOTE, disconnect the battery before you dive into it. I disconnected and cleaned ALL of the plug connectors with spray contact cleaner. Put it back together. The fuel gauge comes to life instantly. The temp is slow, but that looked normal, and worked. Then today the temp stopped working mid way thru an hour of using the tractor. After a palm slap to the side of the instrument panel the temp gauge instantly came to life. So there is also a issue with the gauge itself. I am going to assume that the gauge needle is stuck. so maybe some cleaner and lube in the gauge itself will solve the second half of the problem.

Sep 12, 2012 | Garden

1 Answer

1997 nissan frontier temp guage not working


Sounds like fuse that powers gauges is blown.....if this helps please rate my post and good luck.

Aug 15, 2012 | Nissan Frontier Cars & Trucks

1 Answer

1997 Mazda Millenia. The gas and temp gauges dont work. When the gas tank is full they will work until the gas tank level drops the temp stops working correctly. Any ideas??


wild one you have confirm body ground touch a wire to battery ground and other end to the body...ie fender or frame.... next sounds like damaged cluster assy

Sep 01, 2009 | 1997 Mazda Millenia

1 Answer

Fuel gauge, temp gauge, and auto door locks stopped working while in transit. checked obvious fuses, found no problems. did not check all fuses. Ideas


I had a similar problem with a 2001 Saturn. We checked every fuse and they were all fine. We finally did a 'reset' on the car's computer by disconnecting the battery and reconnecting it a few minutes later. Everything was back to normal after that.

May 27, 2009 | 2002 Chevrolet Malibu

2 Answers

Fuel and Temp Gauge go on and off intermitently


faulty wiring for the lights, and blinkers....

broken gears for the fuel and temp gauge...

just get rid of the damn car, get a Civic of the same year.

I was given a 323 once, unsiezed the rear brakes (the idiot left the thing parked with the e-brake on all winter), then sold it for beer money.

Apr 18, 2009 | 1988 Mazda 323 Hatchback

1 Answer

1997 Escort LX Gauges


POSS NOCKED THE ENGINE TEMP SENSOR WIRE OFF AND IT IS TOUCHING THE ENGINE OR BODYWORK

Apr 16, 2009 | 1997 Ford Escort

Not finding what you are looking for?
1997 kawasaki ZX-9R Ninja Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6480 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...