1992 Aprilia Red Rose Logo

Related Topics:

Question about 1992 Aprilia Red Rose

Open Question

Pas d allumage aprilia red rose 125

Pas d allumage red rose 125

Posted by Anonymous on

5 Related Answers


  • 2712 Answers


Manufacturer: Aprilia (Italy) UK Importer: AWS (Aprilia World Service) Engine: 124cc 4-stroke automatic Cooling: Liquid Top Speed: 55 mph Wheels (F): 110/90x13 Wheels (R): 130/70x13 Brakes (F): Twin Disc Brakes (R): Disc Fuel Capacity: 10.5 litres Seat Height: 770 mm Colour Options: Blue Grey White or Green Insurance Group: TBC The Atlantic 125 shares name and similar design cues with its 500cc brother, but is a different beast. Powered by a Piaggio Leader motor the down scaled scoot looks cuter than the original, space under the seat for one and half lids, adjustable pre-load rear suspension, and three linked disc brakes for stability. ,,,

Posted on Nov 10, 2008


  • 66 Answers

SOURCE: I haven't got an user manual for my Aprilia Red Rose 125 Classic


Posted on Feb 16, 2009


  • 718 Answers

SOURCE: i need aprilia genuine graphics for 08 rs 125

Some of the photos may be for 2009.




Most of the photos are right-hand side. All racetracks are left-hand turn oriented so everyone use that as an advertising base.
Unfortunately the 360 degree rotation icon is not working.

Posted on Apr 03, 2009


  • 9 Answers

SOURCE: de-restrict an aprilia rs 125

Hate to disagree with tina783, but you may have restrictions in place, there is two on the aprilia rs 125. if your on a L plate then the bike should be restricted to 11.5w of power, which is about 15 bhp, when it's de-restricted should be around 34bhp. First is the power valve or a RAVE Valve as some people call it, have you got one? located on the front of the cylinder body, above the exhaust. some times the body of the power valve is there, but there is a blanking plate is underneath it. If the body of the power valve is missing, then its a blanking plate. need to get a power valve and the control unit and the solenoid, fitting is easy look around the net and you'll find one. The next one is the emissions restriction, which is in place due to italy have a real hard on about thier air. The CDI at the back of the back of the bike needs to removed and then if you look at one side you will see a rubber sealant has been used to fill in one side. You need to dig that out and snap a little piece of the circuit board and then refill the hole with a rubber sealant. try to search the net for a how to do on this you need to look at the pics and see what part of the board needs snapping, don't go blindly into this other wise you will kill the CDI. the bike then will act alot more smoothly in the lower end revs.

Posted on Aug 02, 2009


  • 345 Answers

SOURCE: my aprilia rs 125 2000 power valve

you can run the standard plug. no need to change

Posted on May 13, 2010

Testimonial: "thank u very much"

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


I need aprilia genuine graphics for 08 rs 125

The only place you are likely to find the graphics is through Aprilia
customer relations. You can try the dealer though.

Please rate this solution. Thanks!
Not finding what you are looking for?


Ask a Question

Usually answered in minutes!

Top Aprilia Experts


Level 3 Expert

85241 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7336 Answers


Level 3 Expert

4383 Answers

Are you an Aprilia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides