Question about 2003 Yamaha V Star 1100 Classic
First off did you buy it new? Second has it gone through its break in tune up yet?Did you do the re jeting? My guess is it was re jeted wrong & neeeds to be re jeted again or could also need more air(upgraded air kit) or a tfi or power comand fuel mod.My bike also poped untill I did the air & fuel upgrades & them upgrades will also give you a much needed house power needed for this rig.
Bring it to a shop & have it looked at.......
Posted on Apr 26, 2009
Sounds like it may be drawing air around the intake somewhere. Let it idle and spray around carefully with wd-40 until it speeds up. This will reveal the leak.
Posted on Oct 11, 2009
1) Make sure your fuel petcock is closed, then detach the gas line coming off it (left underside of tank)
2) Remove the back seat (single acorn nut on rear fender)
3) Remove the front seat (two allen bolts at the back of seat)
4) There are two metric 12mm bolts under the front seat that hold the tank down. Remove them. The tank should be sitting loose on bike, but connected by some wires
5) Disconnect the white wiring harness under the bike. Tank is now totally free to remove.
6) Pull tank up and back at the same time, it will slide off the two rubber mounts at the front.
Posted on Mar 26, 2010
Oil drain plug is located near the bottom of the engine, left side toward the front. The oil filter element is located on the right side of the engine under the cover toward the front. Changing the oil filter usually requires removal of the front exhaust pipe. There is an aftermarket filter relocation kit that replaces the filter element with a spin on filter that mounts on the front of the bike.
Posted on Jul 14, 2010
Tips for a great answer:
Sep 20, 2009 | 2003 Yamaha V Star Classic
Apr 25, 2009 | 2003 Yamaha V Star 1100 Classic
109 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: