1991 Yamaha FZR 600 Logo
A
Anonymous Posted on Jan 05, 2013

I have 1992 yamaha fzr 600 was running perfect but now it wont fire

5 Related Answers

Anonymous

  • 28 Answers
  • Posted on Dec 28, 2008

SOURCE: 1994 Yamaha fzr 600 speedometer not working.

speed odometer cable needs to be replaced

Ad

Anonymous

  • 1 Answer
  • Posted on Apr 20, 2009

SOURCE: bike won't start 92 yamaha fzr 600

Sounds like the plugs are fouled out, I would pull them and make sure they're about the color of a paper bag. If they're all sooty and wet you most likely have a rich condition. I would take the carbs out and clean everything and pop in a new set of plugs. I have a 87 Fz600 that was acting up until I cleaned the carbs.

Anonymous

  • 137 Answers
  • Posted on Apr 28, 2009

SOURCE: Compatible Motors for 1992 FZR 600

hi m8,, pretty much any fzr motor will fit,, the only thing thats different is the water pump pipe from the rad to the pump at the bottom of the motor,, so may have to re route it,,check that 1st b4 gettin the motor, appart from that all engine bolt holes will line up and the rest will fit,, cheers m8

Moto-Wiz

Moto-Wiz

  • 34 Answers
  • Posted on Aug 21, 2009

SOURCE: 94 yamaha fzr 600. only firing on 1 an 2 cyl

No one thing controls those items.
The ignition and headlight circuits
each have their own fuses under the seat.

If you have power to both of the coil sets
then the coil for cylinder 3 and 4
might be faulty.

Lights may just have a blown fuse.

You have more than one problem
going on there.

Anonymous

  • 6966 Answers
  • Posted on Jan 15, 2010

SOURCE: i need a wiring schematic for a 1992 yamaha fzr

Hi and welcome to FixYa,

Would this help as reference?

Good luck and thank you for asking FixYa.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1992 yamaha fzr 600 genesis just went dead a day after riding. put new battery in and it worked for acouple days but wont hold a charge. its now dead again.

use a vom/ meter on current setting put in circuit ..take hot off battery attach one lead to bat + the other lead to heavy cable u just disconnected. but 1st charge bat to full. see current draw. start to pull one fuse at a time till current drops. that circuit is the culprit. then youll need to find out why is drawing w/ bike off. wire chafed ? minor short.. or when running meter on battery 14.5 volts not running 12.5 volts if the vovtages don't go up when running regulator or altinator is bad or bat wire .. get the manual.. a big help...
Not finding what you are looking for?

109 views

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...