Question about 2010 kawasaki Z1000
The bike doesn't start and the fi light is flashing @
Posted by Anonymous on
Do you have an owners manual ? If not get one from your dealer, it' an invaluable tool....is your oil level so low your settin off a warning and the computer is smart enough not to let you start a dry engine ? There are troubleshooting tips in the manual....otherwise get it to your dealer, that bike is too new to be having unwarranted problems....Good Luck to you friend...Tim
Posted on May 11, 2009
The flashing FI is telling you that the Fuel Injection computer has detected a problem in the system. Some problems are minor (dirty air filter) and the computer will still allow the bike to run. Some problems are major (plugged up injectors) and the computer will not allow the engine to start. You will need to have a dealer check the computer diagnostic reading to find out where the problem is.
Can I get a “very helpful” rating on this answer?
Posted on Aug 23, 2009
Testimonial: "thankyou very much for getting back to me great help i have got the bike shop coming to pick it up cheers"
With the ignition on, use a test light to see if power is getting to the pump. If there is power to the pump, then the relay is doing it's job and you may eliminate it as the problem and look at the pump for the solution. If no power to the pump, check to see if the relay is receiving power, if it is and not relaying it to the fuel pump, the relay would appear to be at fault. And so on.....
Posted on Sep 08, 2009
Testimonial: "Thanks mate. The assistance was just what I needed. Cheers, Rob"
try turning you're spit **** to reserve and see if still does the same thing if so you're more than likely looking at needing to replace the vale adjusting pads this will cause the problem of not running right i had same problem with a 1998 Kawasaki after the adjusting pads were flat-end out... so this should solve the problem best of luck to you sincerely D Jones
Posted on May 30, 2010
Tips for a great answer:
Apr 06, 2014 | 2004 Honda CBR 125 R
417 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: