2008 Yamaha TMAX Logo

Related Topics:

A
Anonymous Posted on Dec 08, 2012

Fit Tunnel bag to Yamaha Tmax

Trying to fit Yamaha Console Bag to Tmax 530 Scooter so bag doesn't move about when bike is in motion

2 Related Answers

Anonymous

  • 1129 Answers
  • Posted on Sep 22, 2009

SOURCE: FOR Yamaha XF50 model Yamaha c3 scooter stolen ignition wires cut

Just pick up some wire connector unions with some shrink wrap.,Identify first the identical matching wire colors (each wire will have a color, example: red with a white strip connects to the other red with white strip etc.) do this to all the wires being sure to slide a length of shrink tube up over one side of the wire before crimping the connector with the two ajoining wires together then slide the tube over the wire crimp connector and use a lighter or heat gun to heat the rubber shrink tube to seal the connector. Do this to all the cut wires one at a time until all are joined together withe union crimping connector method. Be sure you positively identify the color of the wire and its backround stripe color along with the other identical wire that it needs to connect to, you don't want to hook the wires up wrong it could burn something out be caareful and positive the color patterns on the wires to be unioned are identical if you do you will be alright in this job.

Ad

Anonymous

  • 139 Answers
  • Posted on Sep 06, 2011

SOURCE: I'm trying to find a drivers seat with

try logging into cruisercustomizing they have thousands of bikers as members and will answer you . they supply all accessories for all cruiser motorcycles and have a price promise that they will better any other suppliers price. just type cruiser customizing into google or bear or whatever you use.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

tip

Traveling light- its not always what you pack

Since most airlines have started to charge for checked luggage there have been a lot of people turning to carry ons. The probelm is that people are still trying to pack the same amount of stuff into a carry on as they would into a checked bag but with a few simple tips you can drop the weight of your carry on by a lot.

Before you even start to think about the clothes that you want to take with you look at the bag you are packing in. Does it have wheels and a handle? Do you really need a wheeled carry on? If you are traveling by car or plane then chances are you aren't going to be doing too much carrying of your carry on so the wheeles can be a luxury that you may not really need. bags with wheels and hendles can add up to 3 pounds to your bag! So if you can go with out maybe you should.

The times that I have packed in a soft bag like a small duffel I was able to fit more and still be able to fit the bag into the over head bin. A lot of times you will see people trying to force their over sized carry ons into those tiny over head bins. If you cut out the hard surfaces of the bag you will not only cut out a few extra pounds from the weight of the bag but you will also have a much easier time fitting the bag into the over head bin. Not to mention that if you have to move quickly in the airport sometimes carrying your bag on your back is faster and easier to navigate than a rolling bag.
on Oct 07, 2013 • Luggage & Travel
0helpful
1answer

How to replace a q type bag in a hoover wind tunnel vaccumn

Hi! To replace the type Q bags simply insert bag and slide behind tabs. Then, slide locking tab to right to seal bag to the unit. I have also included a link to the owner's manual where you can see pictures of how to change the bag if needed.

http://hoover.com/file/1550/

Hope this was helpful!
1helpful
1answer

The bag on my s7210 doesn't seem to fit properly and I am getting dust in the bag compartment instead of teh bag - what am I doing wrong?

Check to see that the bag mounting bracket and torsion spring are in place, the bracket will be either a dark graphite color like most of the vacuum or green. If you only have a protruding tube where you put the bag on, then your bag mount have come off and you should order a new one; very inexpensive and it comes with a new spring.
0helpful
1answer

How do you attach the bag to the barracuda 2595 blower

The motor housing has a spring loaded, hinged cover over the fan blades (so you don't chop your fingers off when using it as a blower). Open the cover using a screwdriver or narrow tool. Holding the cover open, attach the vacuum tube. Attach the collection bag to the discharge port (same place you attach the blower tubes) and secure in place using the velcro strip sewn onto the bag. Adjust the ******** the bag to fit your shoulder, turn power on and go. To empty the bag, just unzip the bag completely. Make sure you tighten the velcro strip so the bag doesn't come off while you are sucking up leaves.
0helpful
1answer

How do I fit saddlebag supports?

Would help to know mak and model.

Presuming that the supports you have are matched to the bike you have, you should find a couple of nuts on the back mudguard (Probably holding some chrome work in place if it is a cruiser). That are the same spacing as the holes in your saddle bag supports. The nuts, when removed should be long enough to go through the saddle bag supports and back into the mudguard frame. You MAY need to buy extended nuts to get the reach to go through the support, chrome work and frame. Order of things to go through: Nut through saddle bag support first, then original chrome then into screm socket in the mudguard. If it's NOT a cruiser and the above doesn't work, please come back and tell me the model of the bike.
Not finding what you are looking for?

216 views

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...