When running My red light and f1 symbol stays on when running. What can i do about this?

If the RED light with a battery symbol is lit on the dash while the engine is running, your alternator is bad.

WHAT DTCs are set??

Press and Hold the Multifunction button (Call Symbol) and the Volume decrease button (minus symbol) underneath the left speaker until the indicator beneath the call button flashes to green blue red, then release the both button.

if it is a small red light and no symbol beside it then it is a security light. try locking all the doors and unlocking each one with the key.

first change the black toner cardrige and try to run the printer most of the time the problem is gon after the change.

I am slightly unsure if your double drawer dishwasher is the prefinished model (self standing with LCD display) or the integrated model with no LCD display.

The spanner symbol on the top drawer is telling you that a fault code is actuated. But I am not sure where this symbol is on your unit if it is built -in (integrated model).

You will have to check which red light (from the left) is coming on.
I assume there are 5 lights on the inside of drawer.

With the bottom drawer - again you will have to check which light from the left comes on sometimes as you mentioned.

If you have a user manual you should be able to tell what Fault code it is - something like F1 or F2 etc. Is it continuously beeping when the red light is on? How do you turn the beeps off?

The scrubbing bush symbol on bottom drawer may not be a problem. It appears the drawer is programmed to a particular option. But I am not sure where this symbol is showing if you do not have an LCD display panel. You can reset the option - possibly auto lock or auto power or dish cleaned (depending on your model) if you follow the user manual.

happy to take you through a possible cause of the problem if you post answers to my questions above.

Im not sure what the codes are but I can tell you this, my friend, if you dont get it looked at, your motorcycle will suffer as a result. The lights are there for something. Get the Suzuki guy to tell you what they mean and/or fix them before you do mych more riding ... If you expect to continue riding, that is.

Please have a pro look at it.

The FI light is letting you know there is a problem with the Fuel Injection system on the bike. You will most likely need to take it to the dealer and have them diagnose it with their computer. You can check your fuses and make sure they are intact, but most likely dealership problem.

Lube your door latches. One of the door ajar switches are sticking . Use wd40 or some othe spray lube . Spray into the latch and open and close doors several time.