Question about 2002 Yamaha Xv 250 Virago S

Open Question

How do you change a virago 250 choke cable - 2002 Yamaha Xv 250 Virago S

Posted by Anonymous on

Ad

4 Related Answers

tombones

  • 3567 Answers

SOURCE: can you send me a carburetion diagram to replace

Go to the site below where you can see a parts diagram for your specific bike. You will select the actual brand, year, model, etc., once you go to the site. Part numbers and prices are also shown. You can order parts from this site. In the event no price is shown on a particular part and/or the notation "Not Available" is in the description, the part is not in stock. www.babbittsonline.com/pages/parts/viewbybrandand/parts.aspx

Can I get a “very helpful” rating on this answer?

Posted on Aug 13, 2009

Ad

rsrbob

  • 101 Answers

SOURCE: I have a 1994 Yamaha Virago 535cc. I want to know

There is no adjustment, it has automatic cam chain tensioners. If it is making cam chain noise, it could be right between ratchet steps and getting ready to click up to the next step.

Posted on Oct 05, 2009

Ad

Anonymous

  • 8 Answers

SOURCE: 2006 Virago 250 carburator problem

try removing the spark plugs . if there dirty clean the with a wire brush.. check the gaps on them are the same . might not be a bad idea to get new one.. if that doesent work its probably that your carbs are dirty or blocked.. if you leave your bike laid up too long the unburnt feul in the carbs evaporates and th additives in it remain and turn to goo.... a couple of hours work at your local garage.. wont cost much.. dont mess with them if your not sure

Posted on Dec 16, 2009

A Miller

  • 8404 Answers

SOURCE: virago 250 owners manual

www.manuals.org ... if they are still around

Posted on May 01, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2004 yamaha 250 virago. That will not run with choke off.


Take the carburetor apart and clean it . Make sure the slow jet is clear. Be sure to shoot cleaner through the carburetor body so all the pathways are clear.

Sep 07, 2010 | 2004 Yamaha Xv 250 Virago S

2 Answers

1995 Yamaha XV 250 Virago Is there a need to adjust the choke (start) cable? If so, how is it adjusted. I think I'm having a problem with my choke and was planning to replace the cable and starter...


The problems with a plunger style choke happen when the rubber on the bottom becomes deformed and does not seal or the spring does not push the plunger down hard enough, or the cap breaks so the plunger is not pushed down hard enough. If you put your finger over the hole and the bike runs properly your bike is running on choke. You have to block the hole deep inside the carb to shut off the choke. I assume the original problem was that the bike would not idle .If this is the case, take the carb apart remove the slow jet and clean the jet and the carb body out so fuel will flow at idle. This should fix your no idle problem.

Jun 26, 2010 | 2002 Yamaha Xv 250 Virago S

1 Answer

Can you send me a carburetion diagram to replace my choke cable on a yamaha 250 virago 2007. It seems to be quite a project.


Go to the site below where you can see a parts diagram for your specific bike. You will select the actual brand, year, model, etc., once you go to the site. Part numbers and prices are also shown. You can order parts from this site. In the event no price is shown on a particular part and/or the notation "Not Available" is in the description, the part is not in stock. www.babbittsonline.com/pages/parts/viewbybrandand/parts.aspx

Can I get a “very helpful” rating on this answer?

Aug 13, 2009 | 2005 Yamaha Xv 250 Virago S

1 Answer

Have a 2001 yamaha 250 virago and it won't satrt,


You do have fuel in the tank? Pull fuel line from carburetor--turn fuel tap ON--fuel should run from line (into clean can or bottle). If none, the brass screen inside the tap body may be plugged. Remove screen and hold with pliers. Clean with carburetor cleaner from auto parts store. When you set choke, can you see anything happening? May have water in bottom of float bowl. Remove bowl to check (and clean).

Jul 09, 2009 | 2001 Yamaha Xv 250 Virago S

1 Answer

Gas in oil - Yamaha Virago 250 2006


your carb. is flooding the cylinder when its not running.it will cause ring damage.turn your gas pitcock off when not in use.get carb cleaned &adjusted.

Apr 23, 2009 | 2002 Yamaha Xv 250 Virago S

Not finding what you are looking for?
2002 Yamaha Xv 250 Virago S Logo

Related Topics:

1,095 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

gbob59

Level 3 Expert

3063 Answers

randymanfive

Level 3 Expert

501 Answers

Cindy Wells

Level 3 Expert

6220 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...