Bike is making noise when pulling in clutch then keeps trying to start even after the key is out
SOURCE: Clutch problem
check the level of the clutch fluid in your resevoir, maybe a slow leak that is allowing the chutch to release. When was the last time the fluid was changed?
SOURCE: Brake failure light.
This is normal. Its part of the start up diagnostics where the sensors needs to see the wheels rotate 1 or 2 revolutions to verify proper functioning of the ABS system.
SOURCE: 2002 BMW F650 GS jumping out of gear
It is the dogs on the gears themselves that are worn. Only solution is to replace them, which means an engine strip or full replacement with another engine from a salvage shop.
SOURCE: my r1150gs bmw is making a knocking noiseknocking noise
well, something is going on in the clutch hub, maybe the clutch rod bearing.
SOURCE: My BMW 1150RT battery light came on. I replaced
This looks like a regulator or alternator issue. If you have access to a volt meter start the bike and check the voltage going to the battery. Needs to be 13.5 or 14 volts. If not time to take the Beemer to the shop.
121 views
Usually answered in minutes!
×