SOURCE: is thier any problems removing the back wheel on a
No if you know what you are suppose to be doing, a hairy event for first timer, because you have to remove axle nut, adjusting puller nut, brake torque nut on both side and ensure when you put them back together the are aligned. Good enough?
SOURCE: hard starting for my yamaha
see if you have gas in the oil. The carb float needle isn't shutting off full and letting gas seep into the cylinder and into the oil.
SOURCE: Yamaha majesty YP125 scooter. The needle of the
You have either a faulty sender unit in the fuel tank or a faulty guage.
SOURCE: yp 125 majesty wont start. recharged then changed
You need to check the voltage to the HT coils when the engine is cranked , if there is no voltage then the +B to the coils must be checked also the LT switching triggers to the coil.
Make sure that the fuel setting and flow is correct.
136 views
Usually answered in minutes!
×