Question about 1993 kawasaki ZXR 750

1 Answer

Working like three cylinder until 4000 rpm - 1993 kawasaki ZXR 750

Posted by roberanagui on


1 Answer

Adolf Fartherton

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.


    An expert who has answered 20 questions.

  • Contributor
  • 20 Answers

Check your ht leads are right to the correct plugs. I once changed plugs, took ALL leads off at same tiime forgetting which went to which plug. Got 3 and 4 wrong way round - did exactly that.
No expert - got zx7r.

Posted on Oct 12, 2014


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

H2 shifts gears at 4000 rpm rebuilt tranny could it b a sensor problem

No way to know that until the transmission is diagnosed and the systems control model scanned.

Mar 25, 2014 | Hummer H2 Cars & Trucks

1 Answer

I have 1999 Volvo C70 2.3 Turbo and it won't rev past 4k rpm. It idles fine,but stumbles and hesitates when the pedal is pressed. The CEL is on and the codes are for a cylinder misfire and an oxygen sensor...

4000 rpm is pretty may have a fuel cut off for extremely high operation to prevent blowing it up..why so high?? most run between 2200-3000rpm..not 4000...

Dec 23, 2013 | Ford Ranger Cars & Trucks

1 Answer

1997 Cadillac Seville Engine races 4000 RPM on startup

run fault codes and check for accelerator position sensor problem Check for MAP/MAF sensor faults.

Nov 17, 2013 | Cars & Trucks

1 Answer

2009 Hyundai accent in 5th gear the RPM is 4000 is this normal? My speed is 115 Klm an hour

No, it is not. You should be around 2500 rpm at 115 Kilometers an hour. Even if you were in 4th it should only be around 3000 rpm. At 115 MPH you would be near the 4000 RPM. Your either running on 3 cylinders or your transmission is in trouble and needs repair.

Oct 27, 2011 | 2009 Hyundai Accent

1 Answer

Hi,my problem is that under 4000 rpm my engine works fine,over 4000 rpm i lose one cylinder. what could be the source of this problem.

Start with the condensor - replace, and then the points gap(.012"-.016") and plug gap (.023"-.028"). If this does not cure the problem give the carb a proper cleaning.

Aug 09, 2010 | 1984 Yamaha XS 400 L Maxim

1 Answer

My 2001 yamaha r1, has a slight rough idle up to 4000 rpm. The power does not come on until after the 4000 rpm. It has an full akrapovic exhaust which eliminates the ex-up valve. And at times it will not...

Hi, Tom for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Runs rough under 3k rpm at steady throttle FZ1OA Message Board
2000 2001 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha

Btw, I’m available to help over the phone in case u need at

Jun 17, 2010 | 2001 Yamaha YZF-R1

1 Answer

Miss at 4000 rpm

this is a misfire replace your sparkplugs

Oct 07, 2009 | 1985 Honda VT 500 C Shadow

1 Answer

Car accelerated to 4000 to 5000 rpm by itself.

could be a sensor problem in your catalytic convertor or air mass meter.

Aug 08, 2009 | 2000 Mazda 626

Not finding what you are looking for?
1993 kawasaki ZXR 750 Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6431 Answers


Level 3 Expert

85239 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides