Can't find a workshop manual for Yamaha xs400 dohc(seca/maxim??) ANYWHERE!!!!...I have the motor for a bobber project and need the workshop manual for a bit of guidance....any help much appreciate

SOURCE: FZR Manual Wanted

Try phpBB FZR250.com. Each section of the manual is listed but its in Japanese, aparently an English version was not produced. It is detailed and has torque settings. Hope this id helpful.
The Welsh Git.

SOURCE: 1985 Yamaha XJ700 Maxim won't work

All engines need the same three to four things to work correctly..
Compression, Fuel, Spark, (timing).... But, usually those bikes, have fuel issues. The fuel tank spigot has a vacuum controlled valve which when the engine is cranked, suction is applied and fuel then can flow. Second,, the needle and float in the carb tend to get gummed up along with the main and idle jet... You need to make sure the carb is maticulously clean, Using carb cleaner, and tag wire,, or a piece of fine wire ( be careful not to enlarge the tiny holes). Keep refering to the 3-4 list fuel, compression, Spark,,,timing.....
Good luck...!!
Rib

SOURCE: charge-run wiring diagram 1982 Yamaha 650 4 cly & 76 Kaw 750 twin

1982 yamaha 650 maxim coil problem

SOURCE: Need Fork oil capacity for 77 XS400 Yamaha

130cc of ATF or SAE 10W/30 in each fork

Murtaza Akberali Versi

• 767 Answers
• Posted on Sep 19, 2009

SOURCE: I have a 1982 Yamaha XS400 Maxim and I need to

plz visit this site www.xjbikes.com