Question about 2004 Harley Davidson FLHTCUI Electra Glide Ultra Classic
Making ticking sound
Posted by Anonymous on
Turn the Bike on and the Radio off and then follow the buttons on the screen. Most people think you have to do it while it is running and this does not work
Posted on Jun 28, 2009
I am having problems viewing the reply but if you have a FLHRCI then to replace the fuel filter you will need to be prepared to put some time into it.
First remove the console off the fuel tank, one nut below speedo and the phillips screw lower close to the seat. You will have a disconnect on the top left side of the fuel tank to disconnect. Then disconnect the vent tube from the tank with a gentle pull & twisting motion. Now the fun part there are ten torx T20 screws you need to remove, but first you must go buy new ones along with the gasket and fuel filter kit. DO NOT reuse the screws. Now for whatever reason they call this piece a canopy, go figure. Once you have your parts go ahead and raise the canopy slightly and twist it to the left a little. Now this can be tricky because there is a spring loaded hng to work here, be care not to over stress any thing. Then you can begin to pull the canopy and components from the tank. You will be limited by the convoluted tubes (hose) attached as to how far you can raise the canopy, if you remove one be careful as where they attach is plastic and breaks....easily sometimes, then you need a $350 part.
Next read and look at the diagrams that come with your new fuel filter to install it. Once done carefully reverse the canopy removal process and tighten the canopy bolts in cross pattern o somewhere between 18-27 in-lbs. Hope this helps.
Posted on Aug 15, 2009
Tips for a great answer:
Dec 09, 2015 | Cars & Trucks
Dec 02, 2015 | Cars & Trucks
Apr 19, 2017 | Kitchen Ranges
Apr 29, 2014 | 2002 Harley Davidson FLHRCI Road King...
Feb 21, 2013 | E-Machines eMachines Desktop PC
Aug 06, 2017 | 2004 Harley Davidson FLHTCUI Electra Glide...
Usually answered in minutes!
Step 2: Please assign your manual to a product: