Bike was in very poor condition when bought has been stripped resprayed bearings etc and a new wiring loom and a few extra repairs all lights side stand etc working new battery suppling around 12.5v around bike but no spark have 12v going in to cdi unit about 8v on blue wire connection coming out check blu/white wire and black at coil about 2v is it just ht leads or cdi aswell
Not knowing about Gilera but Some general suggestions for ignition problems control if applicable could be: a bobin(coil) sparkplug plugconnector control the gap between flywheel and ignition coil, contact points, contact breaker to mass can have a problem or even a cable,a rotor under distributor hood. or ignition not on time,
If ordering for an engine an ignition coil don't forget always to give up the serialmotor number and year of build to the seller because of marketing technical modifications can be made in the same production year of different ignition coils or flywheels and other.
SOURCE: 19-95 KLF300 ATV Kawasaki 4x4 no spark put new ignitor unit on.
i ******* hate my kawasaki kdx 125 1992 there is no spark and i dont no wot it needs ive bought a cdi for it an it wernt that and i bought a new coil and it wernt that either could anyone help me please
SOURCE: 1989Fzr6 3he bike/ 1995 4jh engine
does the bike have a fuel pump?what carbs are you running ?are the carbs in sync?
167 views
Usually answered in minutes!
×