Question about 2003 Yamaha V Star Classic

Open Question

Yamaha v star 650 running really lean with no power under a load

Posted by Anonymous on

Ad

5 Related Answers

bunnydawg

Roberta Smith

  • 5158 Answers

SOURCE: How do you charge the battery on a 2007 Yamaha

i'm not sure if you are saying how to access it. if you can... just unhook the battery.... attach the charger to it ... be sure you have the polarity correct.... after charging it for few hours.... hook the battery back up.... start up the bike... and let it charge the battery the rest of the way

Posted on Mar 17, 2009

Ad

Anonymous

  • 292 Answers

SOURCE: how to lower the idle on a 2002 yamaha 650 v-star classic?

under the left side of the gas tank you will see i black knob/screw at the end of what looks like a hose. the knob faces the rear of bike. that adjusts the idle. its real easy to find and the only adjustment you can make to the carbs.

Posted on Apr 02, 2009

Ad

Anonymous

  • 125 Answers

SOURCE: Motorcycle running on one cylinder

First, determine which cylinder is bad. Touch the exhaust pipes to determine which is hotter.(the pipes get VERY hot so be quick or use a non-contact thermometer.)
Remove and look at the bad cylinder's plug, if ti's wet you are getting fuel, try replacing it. (Heck, replace it anyway.)
If there is no fuel on the plug the carburetor might be plugged or need cleaning.

Posted on Jun 15, 2009

Moto-Wiz

Moto-Wiz

  • 34 Answers

SOURCE: where is oil filter located on 650 v-star yamaha

The oil filter is on the right side
under a cover with 3 screws in it.
Remove the covers and replace the filter
and the o-ring on the cover.
Watch which way it goes in
when removing it.

Posted on Aug 21, 2009

Anonymous

  • 6 Answers

SOURCE: yamaha v star 650 oil change

If ie is like other v stars it is on hte right side sitting on bike. Small cap with 3 or 4 allen screws. This is just a cover. You do not need to remove this. The cover behind this one is where the filter is at. Take the screws out and it will be snug pulling off due to an o ring seal. You will probably need to loosen the exhaust and/or the foot rest. Good Luck

Posted on Aug 18, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Yamaha V star Final Drive shaft


The drives for a 650 and an 1100 are different part numbers, so it probably wouldn't fit.

However, you can buy what parts you need to replace here:

http://www.bikebandit.com/houseofmotorcycles/2004-yamaha-v-star-classic-650-xvs65as-drive-shaft/o/m145479sch295406

Feb 16, 2014 | 2004 Yamaha V Star Classic

1 Answer

Problem with power to my Yamaha XVS 650/A V-Star Classic, it won't start?


hey Joseph,, have you had the battery load tested?? Have the CCA (Cold Cranking Amps) checked.. O'Reilly, Autozone, Advance Auto..etc can load test your battery... 12 volts only wil not get much done... you need amperage and 13.6+ volts...

Aug 29, 2017 | Yamaha Motorcycles

Not finding what you are looking for?
2003 Yamaha V Star Classic Logo

Related Topics:

680 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

gbob59

Level 3 Expert

3063 Answers

randymanfive

Level 3 Expert

501 Answers

Cindy Wells

Level 3 Expert

6199 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...