Question about 2004 kawasaki ZRX 1200 R

Open Question

How to change oil on a 2004 kawasaki zrx1200

Where is the oil filter located and how do you remove it? @

Posted by Anonymous on

Ad

4 Related Answers

Anonymous

  • 76 Answers

SOURCE: find oilfilter location on kawasaki zzr 1100

Bottom of motor there is about a 31/2" round cover with a bolt through the middle thats the filter you may have to remove the exhaust to get to it on your bike

Posted on Jan 30, 2010

Ad

Anonymous

  • 2 Answers

SOURCE: Changing the oil/oil filter

I just got a 97 ZX9 and had the same issue... until I read the service manual. You need to remove the oil pipe flange bolt in order to get enough room to be able to remove the filter between the exhaust header and the motor case. Of course, unthreading the filter is an issue by itself. If you do not have the cap (tool) that fits over the end of the filter and provides access for a rachet tool to unscrew it, then you probably need to do what I ended up doing... punching a screwdriver through the old filter in order to gain the leverage needed to start unscrewing the filter.

Posted on Apr 12, 2010

Ad

Anonymous

  • 71 Answers

SOURCE: I changed the oil and filter in my 2007 kawasaki

you probably have a leak! It is possible, (depending on what type of oil you put in)
that the oil dissolved the gasket, or removed sludge from an existing hole, causing it to open. but if you dont have any oil spots..well....thats a whole nother story.
terribly sorry!!
i hope this helps in some way!

Posted on Jun 09, 2009

emissionwiz

Marvin

  • 85239 Answers

SOURCE: what is the capacity of oil in the crackcase of

add 4.5 quarts then top off

Posted on May 28, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of oil filter in Skoda Octavia 2006 1.9 diesel


Octavia (a4 ) remove top engine cover the engine oil filter is at front cover, big black plastic cover remove with special tool the oil filter can be remove and replace with plastic ring

Nov 21, 2013 | 2006 Skoda Octavia 1.9

1 Answer

Where is oil filter on 2006 hhr 2.2?


Hello, the oil filter location is on the front of the engine, just below the right side of intake manifold.



  • Use a 32 mm (1 1/4 in) socket on the hex on top of the oil filter cap, or an oil filter wrench on the outside diameter of the oil filter cap.
  • Remove the oil filter cap and filter.
  • Remove the filter from the cap.
  • 457bc50.gif

    Oct 24, 2010 | Chevrolet HHR Cars & Trucks

    3 Answers

    Were is locate the oil filter for the borrego 2009 4.6


    I have an '09 Borrego, the oil filter is located on the front of the motor below the harmonic balancer,
    To access it remove the lower valenca panel under the front behind the bumper. There are 7 bolts holding the panel on, remove all 7 bolts and the panel will drop free. You will see the oil filter housing just above the sway bar and below the harmonic balancer. You can use a 1-1/16" socket and a 6"-12" extension to remove the filter cap. Make sure to get the V-8 filter, it is not the same as the 6 cyl filter.

    Oct 07, 2010 | 2009 Kia Borrego

    1 Answer

    Where's the oil filter located at?


    That has a canister style fuel filter. The cap is located right next to the oil pan on the passenger rear corner roughly of the oil pan. It will be black and made out of plastic. You will need a filter cup to remove the cap. Once the cap is removed you will be able to replace the oil filter.

    I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

    Oct 03, 2010 | 2001 Oldsmobile Intrigue

    1 Answer

    Oil change


    First, you will need to get underneath the truck and locate the oil pan. Turn and remove the bolt on the oil pan to release the oil (use a container to catch the old oil) Now, climb underneath the driver's side of the vehicle, beneath the engine, and locate the oil filter. The filter is a cylinder approximately six inches in length which extends from the side of the engine. Remove the oil filter and then replace it with a brand new one. After all of the oil has drained out, tighten the bolt and the locate the oil cap and remove it. Now add five quarts of oil into the engine

    Jul 21, 2010 | 1995 GMC Yukon

    1 Answer

    Oil pump ,,,where is the oil pump located on a 1997 dodge caravan


    Hello
    Welcome!
    Oil pump is located on the oil pan.
    Parts needed,,,oil,,,, oil filter,,,, oil pan gasket,,, oil pump,,,, oil pump pickup tube..
    time to do this,, about 3 hours
    Instructions,
    Raise van place on 2 jack stands
    drain oil remove oil filter fill new filter install.
    remove bolts from oil pan,
    remove oil pan..
    remove 2 bolts that hold oil pump and tube.

    install new pump and tube tork bolts to 45 fp
    replace oil pan gasket and install oil pan
    tork pan bolts to 35" pounds
    install drain plug
    fill with oil
    start and check for leaks

    let me know if i can help more

    Jul 17, 2010 | 1997 Dodge Caravan

    1 Answer

    Where is oil filter located on 2008 Cadillac CTS 6 cylinder


    The Location of the oil filter depends on which engine you have in your CTS. the 3.2 engine the oil filter is located on the bottom of the engine to the left of the oil pan. It is not a screw on type filter it is a canister filter. You will have to unscrew the lid to gain access to the oil filter. On the 3.6 Engine the oil filter is also a canister filter but it is located on the top side of the engine. On the drivers side around the center of the engine cover. It will take a 15/16 socket to remove the lid.

    Aug 15, 2009 | 2008 Cadillac Cts

    1 Answer

    Can't locate oil filter(2006 ) trail balzer


    The oil drain plug and oil filter are under the engine skid plate. You need to remove the trap door to see. The skid plate door is located by the drivers side door, directly midway underneath the vehicle. You will need a flat or Phillips-hear srewdriver to open the trap door. Don't worry, the screws are 'loss-proof' and will not fall off the trap door plate. Once this has been removed, the oil drain plug and oil filter are now visible and accessable (how smart is that!) Typical oil change and oil filter replacement time = 15-20 mins. for a familiar shadetree. p.s. The Inline 6 (24 valve - 4.2L) takes 7 quarts of oil. Good luck!

    Aug 03, 2009 | 2006 Chevrolet Trailblazer

    1 Answer

    Where is the oil filter located?


    The engine oil filter is located just right of center if standing in front of the car. By removing the LARGE Black cap with the 36mm nut you will expose the filter element, make sure to do this before draining the oil from the drain plug in the pan. Otherwise the filter will still hold oil until loosened a bit. A typical oil change should go like this.
    1. Engine Hot, not running, Loosen filter housing, don't remove yet.
    2. Drain Oil, Replace plug.
    3. Remove and Replace filter and O-Rings
    4. Add oil.

    May 08, 2009 | BMW 530 Cars & Trucks

    1 Answer

    Oil filter location


    Aerio oil filter is on the front side of the engine behind the lower engine cover remove the 2 push pins that hold the lower engine cover to gain access to the oil filter

    May 15, 2008 | 2005 Suzuki Aerio SX

    Not finding what you are looking for?
    2004 kawasaki ZRX 1200 R Logo

    Related Topics:

    653 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top kawasaki Experts

    Arnie Burke
    Arnie Burke

    Level 3 Expert

    6487 Answers

    Marvin
    Marvin

    Level 3 Expert

    85239 Answers

    Gino Cussen
    Gino Cussen

    Level 2 Expert

    217 Answers

    Are you a kawasaki Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...