Question about 1993 kawasaki VN 750 Vulcan
How do I change the oil in 93 Vulcan 750 @
Posted by Anonymous on
Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Oil Change Kawasaki Vulcan 750 Forum Kawasaki VN750 Forums
How to change motorcycle oil Kawasaki Vulcan
Kawasaki VN 750 Service Manual
OEM Parts for Kawasaki
1993 Kawasaki Vulcan 750 Owner Manual
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on Mar 15, 2018
if you plan to modify your exhaust system you will have to rejet your carbs to compansate. kits are availableat most aftermarket shops.
Posted on Mar 24, 2009
you must have a fault with the sensor buddy replace this or the connections are not in correctly or is this the oil pressure light
Posted on Sep 05, 2009
Not a big deal. Just remove the left engine cover and you will find the stator bolted to it. Remove the three bolts holding the stator and the stator will then be free to come apart from the cover.
Posted on Nov 01, 2009
Firstly run your engine till you reach its normal running temp .The engine drain plug will be found under neath the engine normally at the lowest part .Warm oil drains out of the engine much more quickly that cold oil ..when all the oil stops dripping then remove the oil filter ,make sure that the sealing ring is removed ,take care the oil in the filter will be very hot .replace with your new filter make sure you do not cross thread the oil filter unit and any seals have been fitted . Refit your drain plug and fill up to the required level . start engine ,your oil level will drop because the oil filter will fill up and the new oil will be pumped around the engine. make sure that the engine level is topped up when all the oil has reached all the parts of the engine .Do not over fill the engine as this will cause unwanted pressure .and oil leaks .Remember to replace the oil filler cap and that its tight .
Posted on Mar 14, 2010
Did I you change the pipes or hi flow air filter?? If so you are running lean and need to rejet or at least adjust air screw on carb.
Posted on Oct 21, 2012
Tips for a great answer:
Jul 23, 2014 | 1992 kawasaki VN 750 Vulcan
Jun 05, 2014 | 1992 kawasaki VN 750 Vulcan
Jul 05, 2013 | 1996 kawasaki VN 750 Vulcan
Aug 17, 2012 | 1993 kawasaki VN 750 Vulcan
Jul 30, 2012 | 1993 kawasaki VN 750 Vulcan
Jul 24, 2012 | 1993 kawasaki VN 750 Vulcan
Jun 29, 2012 | 1987 kawasaki VN 750 Vulcan
Mar 18, 2012 | 1993 kawasaki VN 750 Vulcan
Feb 24, 2012 | 2004 kawasaki VN 750 Vulcan
Oct 26, 2013 | Motorcycles
132 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: