Question about 1985 Ducati 750 F1
I know this is a maintenance question but I'm looking for a little local information. I went to clean my chain yesterday and noticed that it's way too long. There's a bit of kinking too so it's time to get a new chain. The chain maintenance info on this board seems pretty detailed and doesn't look too hard (lol perhaps I should mention that I'm a noobie and haven't worked on my bike much yet). Should I attempt this on my own? Any suggestions where in TO I should get the chain and tools? Or should I take the bike to Rev Cycle (any rough estimates on price)?,Depending on your skill and comfort level you can probably tackle this job OK, here are some rules (I'm making up early Saturday morning without the benefit of coffee) Buy the best quality chain you can buy, (x or o ring) If the chain is screwed chances are your sprockets are too (yeah I know $$$) It's a good time to go up in the rear or down in the front (sprocket teeth, don't do both) if your bike has a single swing arm forget it (tools stands etc too much hassle adjusting probably not worth it just take it too the dealer unless your very determined and are investing in the tools and time etc) otherwise no biggee. Now so your chain lasts don't over adjust, unsprung the chain will appear loose get some else to sit on the bike as you check the chain tension all the way through the suspension travel check chain and sprocket alignment (laser, eye ball whatever) sometimes shims or other pieces go missing (especially when chain have kinks or wear prematurely) chain wax is your friend, lube it hot and use a clean rag to get excess and clean sprockets.,,,
Posted on Nov 10, 2008
Tips for a great answer:
You can access the following by hitting the menu key
1. Enter the maintenance mode [>>Maintenance].
2. Press the OK key. [>>Maintenance?] will be displayed.
3. Press the OK key twice. The counter for each component is reset immediately.
Aug 26, 2014 | Kyocera FS-1370DN
Aug 01, 2014 | Xerox Phaser Office Equipment & Supplies
May 22, 2013 | HP Laserjet P4515x Printer
May 25th, 2011 • Printer
How to Reset Brother DCP 110C, 115C, 120C, 130C, 135C, 145C, 150C, 165C, 185C, DCP 195C Printer:
1. Press the Menu, then Mono Start key then press the UP arrow key 4 times to make the machine enter the maintenance mode and "ERROR 46′ pops-up in the display.
2. Enter maintenance mode 80: Select 8 by pressing the UP/DOWN arrow key and push OK key and select 0 and push OK key
3. Now Press MONO arrow key several times until you see PURGE:XXXXX
4. Select 2 and push OK, Select 7 and push OK, 8 and push OK, select 3 and push OK and the purge counter is now reset to 00000.
5. Press STOP/EXIT key to go to root of maintenance mode
6. Enter code 99 to exit maintenance mode: Select 9 and push OK, Select 9 and push OK.
Jul 24, 2011 | Brother DCP-110C All-In-One InkJet Printer
Dec 06, 2010 | HP P4515n LaserJet Printer
Aug 03, 2010 | HP LaserJet P4015 Printer
May 24, 2010 | Computers & Internet
Mar 31, 2010 | Canon PIXMA MP460 All-In-One InkJet...
Mar 20, 2010 | Brother DCP 165C Compact Color Inkjet...
Jul 07, 2009 | HP P4515n LaserJet Printer
158 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: