Which size tires will Fit?
SOURCE: 21" Conversion On A FLHTC
in feb 09 issue of baggers they put a 21 inch rc compoent wheel w/metzeler me880 on 2000 road king all they did was remove front fender &tape original holes &drill out to 3/8 so fender can be lifted up in back a little bit.
SOURCE: What do I need to remove a front fender on a 2004
Yes you need what is called a "Torx".
Testimonial: "Thanks,I will go by one"
SOURCE: Tire Replacement
ME880 is the Metzler you're looking for. It comes in black, and wide white wall. I have it for my back tire. Haven't worn out my front enough to get a match on the front yet, but I'm working on it! They are a huge improvement over the dunlops
SOURCE: 21" front wheel for 2002 road king classic
Goes right in. Except be sure to check front fender light bolt. Had to cut many before.
SOURCE: i have a 2005 heritage softail classic i need to
I think your rear master cylinder is 5/8" in diameter since it is only a single disc in the rear brake. Dual disc front brakes usually have the larger 3/4" diameter master cylinder. If you take the master cylinder apart, you can either measure the bore or look on the rubber "cup". The size is usually on the cup.
Fitment for 1999 XL Tubeless Cast Wheels:
Wheel Position and size = 19 inch Front; Rim Size and Contour = T19x 2.15 MT; Rim Valve Hole Diameter = 0.45 inch; Tire Size = Dunlop D401 ELITE S/T 100/90-19
Wheel Position and size = 16 inch Rear; Rim Size and Contour = T16 x 3.00 D; Rim Valve Hole Diameter = 0.35 inch Tire Size = Dunlop D401 ELITE S/T 130/90-16
Wheel Position and size = 19 Inch Front; Rim Size and Contour = T19x2.50 TLA; Rim Valve Hole Diameter = 0.45 inch Tire Size = Dunlop K591 S&FR Elite SP 100/90-V19
Wheel Position and size = 16 Inch Rear; Rim Size and Contour = T16x3.00 D; Rim Valve Hole Diameter = 0.45 inch Tire Size = Dunlop K591 S&FR Elite SP 130/90-V16
Tire Fitment for 1999 XL Tube Laced Wheels:
Wheel Position and size = 19 Inch Front; Rim Size and Contour = T19x2.50 TLA; Tube Size = MJ90-19 Tire Size = Dunlop D401 ELITE S/T 100/90-19
Wheel Position and size = 16 Inch Rear; Rim Size and Contour = T16 x 3.00 D ; Tube Size = MT90-16; Tire Size = Dunlop D401 ELITE S/T 130/90-16
Wheel Position and size = 21 Inch Front; Rim Size and Contour = T21x215 TLA; Tube Size = 3.00 x 21; Tire Size = Dunlop Touring ELITE II MH90 - 21 56H
Wheel Position and size = 16 inch Rear; Rim Size and Contour = T16x 3.00 D; Tube Size = MT90-16; Tire Size = Dunlop Touring ELITE II MT90 - B16
Tire Pressure - All Models:
Cold up to 300 Lb. Load (includes rider, passenger and cargo)
Front = 30 psi (2.1 bar)
Rear = 36 psi (2.5 bar)
Up to GVWR maximum load
Front = 30 psi (2.1 bar)
Rear = 40 psi (2.8 bar)
834 views
Usually answered in minutes!
×