Question about Kymco Hipster 125 Motorcycles

1 Answer

Fuel gauge and clock not working Kymco Hipster 125

New battery fitted everything else works apart from fuel gauge and clock. @

Posted by barrieandroe on

  • barrieandroe
    barrieandroe Mar 06, 2012

    have checked two in line fuses under petrol tank and they are ok.
    the main fuse by the battery is ok ( this is just for the electric start only ) I think so anyway. Can anybody help? Please

×

Ad

1 Answer

Gregg Mahin

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Kymco Master
  • 63,525 Answers

Hi, Barrieandroe for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kymco, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Clock not working
Fuel Gauge Sending Unit Troubleshooting
Manuals Kymco
http://kymcopartsonline.com/catalog/table_overview.php?s_fk_manufacturers_id=21&s_fk_model_ye
http://kymcopartsonline.com/catalog/table_overview.php?s_fk_manufacturers_id=21&s_fk_model_ye
https://www.manualslib.com/manual/767692/Kymco-Agility-City-50.html#product-Agility%20City%20125

Posted on Jul 10, 2019

Ad

3 Related Answers

Anonymous

  • 2336 Answers

SOURCE: windsheild

125cc isn't a very big engine to push a scooter with a windshield. Adding a windshield dramitcally increases the load on that little engine. Kymco does have one and Your dealer can probably order it for you. You can also find it on http://www.kymcousa.com/access/windscree...

Posted on Nov 10, 2008

Ad

hkp7

  • 397 Answers

SOURCE: i have a kymco hipster

Check your fuses and if they're good, check the connections at the far end of the battery cables. If they are clean and tight, check the battery cables themselves for continuity. If all of the above are good, start troubleshooting from the keyswitch back. If you know which terminals to jump out at the keyswitch for the lights, jump them out; if the lights light up, suspect the switch.

Posted on Jun 25, 2011

andy

  • 33 Answers

SOURCE: 2007 kymco agility 125cc scooter

could be one of a few things. Most likely fuel related. 1) carb blocked main jet (whip it out n clean it) 2) air filter clogged up or split (remove spark plug and if it is black there is too much fuel and either the airfilter is blocked up or the choke is stuck on, if it is very white there is too much air getting infrom either a split air filter or leaking inlet pipe) 3) change spark plug.

Posted on Jul 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 Chevrolet Malibu 54k miles - replaced fuel pump assembly & now some dash warning lights and clock stay on. Any ideas?


Replacing a fuel pump has nothing to do with instrument cluster lights or the clock staying on. Unless you shorted wires , did you disconnect the negative battery cable before hand ?
The body control module (BCM) performs the following functions:
• A/C compressor request
• A/C cooling fan
• Exterior and interior lighting control
- Daytime running lights (DRL)
- Automatic lighting control
- Fog lamps
- Interior lighting
• Battery rundown
• Chime
• Gauge control
• Instrument cluster indicator control
• Fuel gauge control
• Temperature gauge control
• Theft deterrent
Interpreting all of the driver warnings sent by the control modules on the class 2 serial data line
Sending the information to the instrument cluster in the form of a SPI serial data bus message
The following list of messages are sent by the BCM to the instrument cluster:
• Fuel gauge position
• Temperature gauge position
• Oil pressure
• Low engine coolant
• Check oil
• Volts
• ABS
• High beam
• Low fuel
• High temperature
• Washer fluid level low
• CRUISE
• BRAKE
• SERVICE VEHICLE SOON
• Door ajar
• Seat belt
• THEFT SYSTEM
• PRNDL
Check the fuel level sensor wires , the fuel level sensor is a input to the BCM .

Apr 21, 2018 | Chevrolet Cars & Trucks

2 Answers

Mazda b2200 fuel guage not work sending unit new


Check the wires going to the instrument cluster, and check the wires from the sending unit. Possibly a corroded or damaged wire/connector

Sep 26, 2017 | Mazda Cars & Trucks

1 Answer

RPM gauge&Speedometer not working everything is fine clock light fuel oil pressure fuel user-gauge i did buy used speedometer same thing on new one any tip or idea please Thank you very much


Replace the out put speed sensor on the transmission. This should get the speedo back. Not the RPM's though. Year make and model helps.

Dec 29, 2015 | Cars & Trucks

1 Answer

1999 ,4x4,454,2500suburban.airbaglight stays on,when truck is turned off something is draining the battery ,the clock doesnot work fuel gage doesnot work.


Sorry to say, but none of these are related. Fuel gauge is probably the sending unit in the tank, could be wiring. The air bag could be the module,the bag unit, the sensors, or bad wiring. The radio is probably your most likely choice for battery drain. The three main things I have found to drain batteries are the radio, the starter, and the alternator. These three will kill a new battery in 1 to 2 days, An older battery over night. Shorts in the interior lighting is 4th..

Apr 05, 2014 | Chevrolet Suburban Cars & Trucks

2 Answers

2005 nissanmaxima fuel gauge went haywire


the gauge connections must be loose or adrift

Jul 05, 2010 | 2005 Nissan Maxima

4 Answers

Speedo not working on renault kangoo 1999 still clock up the miles fuel gauge and temp gauge are still working


If its still clocking up the miles then the speedo its self is faulty,Fit new ometer.Not senser.Good luck

Sep 15, 2009 | Renault Sportwagon Cars & Trucks

1 Answer

Battery area


The batteries (2 AAA) are made as a back up for the clock and alarms only, and would not be powerful enough to run the radio on their own.

Jun 01, 2009 | Memorex iWake MI4004 Clock Radio

2 Answers

Where is the fuel filter located on a 1996 pontiac grand am 3.1 se


driver side rear. by the fuel tank. its cylinderical in shape. either flat black or aluminum in color held onto car by a metal strap

Apr 12, 2009 | Pontiac Grand Am Cars & Trucks

1 Answer

Repair of battery-operated wall clock


We had the same problem with our wall clock, but it was due to corrosion from a dead battery. The battery acid leaked inside and disrupted the connection between the metal contacting the batteries and the circuit (the one with the copper coil). We took everything out cleaned the contact points with acetone (nail polish remover). After that we had to bend the contact heads up just a little bit so they would contact the circuit again (I guess we bent them down a little when we were cleaning it). It worked just fine after that. I know it sounds intimidating to take apart a clock and put it back together but you're going to throw it out anyway. Just give it a try. It was kinda fun. Think of it as a puzzle. If you can't fix it, I imagine you can get a new motor at any hobby store or Michaels.

Jun 24, 2008 | Kenneth Cole 1213 Wrist Watch

1 Answer

Casio travel alarm clock


I don't think a new display is still available after 12 years so in the bin and get a new one.

Jul 20, 2017 | Casio PQ50S-2 Travel Alarm Clock...

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kymco Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6386 Answers

Are you a Kymco Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...