Question about 2005 Suzuki RM-Z 250
Torque specs @
SOURCE: sospension original set up
The best way to set up your suspension is to have someone hold the bike while your on it. Then a thrid person to watch. You with your feet on the pegs jump down on it with out sitting on seat. This thrid person is there to watch to make sure that the bike will rebound or come back to normal, with both the front and rear coming up at the same time. As far as the best set up, it is all a weight thing. Keep it where it is take to woods, if you don't like it adjust it. Keep doing this until you like it. It took me 2 days on my bike just to race one Harescramble.
Posted on Jan 09, 2009
The haynes book is not recommended since there are numerous mistakes and they still will not update. One of the biggest is the firing order.
The factory service manual is the only way to go.
Head bolts - 46 - 50.5 lbs (there is an order sequence for the bolts)
Intake & exhuast manifolds- 13.5 - 20 lbs
Flywheel - 41.5 - 47 lbs
Clutch cover - 13.5 - 20 lbs
Posted on Mar 17, 2009
Like I told somebody earlier to day lower the octane rating of the gas you are using....repost if you need anything futher......
Posted on Jun 22, 2009
The 8mm head bolts are torqued at 19 - 21 ft/lbs.
any smaller 6mm bolts are torqued to only 6 ft/lbs
like those on the lower cylinder.
Posted on Aug 22, 2009
Tips for a great answer:
Jul 17, 2016 | Suzuki RM 125 Motorcycles
Jul 11, 2015 | 1998 Ford Explorer
Oct 15, 2009 | 2005 Suzuki RM 250
Oct 09, 2009 | 2005 Suzuki RM 250
Aug 20, 2009 | 2003 Suzuki RM 250
226 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: