Yamaha 2008 r6 wont start - 2008 Yamaha YZF-R6

SOURCE: motorcycle wont start

Hi,
Hope this helps you.
http://www.yzfr6.net/manual/

SOURCE: error code yamaha r6 2007 51 how can i erase it?

could be a safety shutdown by computer, only your dealer can erase the code....and then you'll find out whats wrong...and why the computer doesn't want you starting and damaging the bike.......Good Luck to you friend....Tim

SOURCE: 2008 Yamaha YZF-R6 turn signal wiring harnes

sorry.. i don't know off the top of my head but super simple way to check.. get an electrical tester that pierces the wire and turns on a light.. ($5 at walmart--seriously) turn on left signal, check the wires.. the one that is flashing is your left signal... so on and so forth..

(this tool will be super handy in the future also)

:)

SOURCE: how do i remove battery from 2008 yamaha r6

you need to remove the rider seat and under there you will find the battery

SOURCE: my 2008 yamaha r6 will not start fault code 60 is

This is from the service manual.
Fault code No.: 60
Symptom: Throttle servo motor: open or short circuit detected. Defective throttle servo motor. Malfunction in ECU (servo motor driving system).
Probable cause of malfunction:
•Open or short circuit in wire harness.
•Defective throttle servo motor (potentiometer circuit).
•Stuck throttle servo motor (mechanism).
•Stuck throttle servo motor (motor).
•Malfunction in ECU.