Suzuki RM-Z 250 - Recent Questions, Troubleshooting & Support - Page 2


to much oil in crank case or possible rings gone

2004 Suzuki RM-Z... | Answered on Sep 29, 2017


could be the shifting paw

2004 Suzuki RM-Z... | Answered on Sep 29, 2017


compression under 110 get's is questionable.
check your crank bearings and seal.
also clean carb and check float level

2004 Suzuki RM-Z... | Answered on Sep 29, 2017


do not pull in on the clutch
rock back n foward mildly trying to shift it

2004 Suzuki RM-Z... | Answered on Jul 12, 2017


Exhaust power valve adjustment for "stock setting" is: 1/2 turn out from closed.

2004 Suzuki RM-Z... | Answered on Dec 08, 2016


If there is not a screw on the side of the carb then look at the top of the carb where the throttle cable connects. The fitting at the top of the carb is threaded and would adjust the carb idle. There may be a similer adjustment at the twist grip but I don't remember one there.

Hope you can rate this solution as a 'FixYa'

2005 Suzuki RM-Z... | Answered on Dec 20, 2015


Check the thermostat in the bike it may not be opening at all sounds like it is not working and also check the water pump as well

2005 Suzuki RM-Z... | Answered on Oct 20, 2015

Not finding what you are looking for?
Motorcycles Logo

183 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6487 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Suzuki Motorcycles

  • Forum

View Most Popular

  • Suzuki Motorcycles
Loading...