Puma Runner 50 Black Soul - Popular Questions, Answers, Tips & Manuals - Page 6


That isn't good! Broken parts on the lever, broken selector forks? Start taking it to bits. Side cover off and what can you see? Nothing, keep going. The gearbox itself is strong, but the selector mechanisms aren't.

Motorcycles | 15 views | 0 helpful votes


your clutch plates are not evenly oiled from sitting... slip that clutch carefully and also check your oil levels

Motorcycles | 52 views | 1 helpful votes


Hi, Wextryx33 I would really love to help you with your bike question but due to the magnitude of yesterday's solar flare the batteries in my crystal ball are dead and my mental telepathy headset circuitry was melted. I need the year, make, and model of your motorcycle please click on " Ask For More Information" directly below and provide this information in the box that will open and then click on the green "SEND" box in the bottom right-hand corner after it posts I will receive an "ALERT" icon that will allow me to respond to your information. Good luck and have a wonderful day.

Motorcycles | 38 views | 0 helpful votes


Hi, Galen you need to repost your question under the LaPavoni Napolitana PA-1200 category, not Motorcycles. Thanks, Gregg

Motorcycles | 74 views | 0 helpful votes


You posted to the category 'Motorcycles'. I am thinking 'micro' is probably an abbreviation of 'microwave', as in an microwave oven.

The buzzing is probably the transformer, it is attached to a capacitor with enough stored energy to throw you across the room and stop your heart. The magnetron has a toxic heavy metal core and microwaves can make you blind in about 5 seconds of exposure. You decide if 'steep' and your own life is worth the risk. I would go and get a second opinion anyway. Also the case is held together with security screws.

Motorcycles | 42 views | 0 helpful votes


NOT FROM FIXYA WE DIDN'T MAKE IT OR SELL IT TO YOU DID WE?

Motorcycles | 13 views | 0 helpful votes


I know that on a Polaris, it has a safety feature that limits how much throttle can be used in reverse. It will go WAY to fast in reverse without it and be very dangerous. There is, however a manual override switch to defeat this feature temporarily while holding the switch in. Then your in control of what happens. I would check to see if this applies to your rig.

Motorcycles | 114 views | 0 helpful votes


Hi, Johnny you need to repost your question under the ATV category, not Motorcycles. Thanks, Gregg

Motorcycles | 113 views | 0 helpful votes


Hi, Anonymous 031 = diagnosis of the ignition coil cylinder 2
for this scenario, you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.motorcycle-manual.com/yamaha-fault-codes/
https://opgsff.org/files/GTS1000.pdf Free Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
http://mybikemanuals.com/yamaha/

Motorcycles | 68 views | 0 helpful votes


Hi, Ronald could you take a close up picture of the carburetor including the puddle and email to me at [email protected] also I need to know what model Harley you have. Thanks, Gregg

Motorcycles | 98 views | 0 helpful votes


Hi, Chris for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?sxsrf=ACYBGNQw80TNKgGm1uJ8_Y0dHm7Jq4X77A:1580978679798&q=Wiring+diagram+1999+Suzuki+GSX-R600+SRAD&tbm=isch&source=univ&sa=X&ved=2ahUKEwjPhe3ExLznAhUDpFkKHdX6Ch4QsAR6BAgJEAE&biw=1440&bih=757
http://www.classiccycles.org/1852/597964.html
https://www.manualslib.com/manual/896122/Suzuki-Gsx-R600.html
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki/

Motorcycles | 71 views | 0 helpful votes


It is wasn't spitting and sputtering while trying to start, I would suspect a fuel problem.

Motorcycles | 79 views | 0 helpful votes


Hi, Joseph for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.amazon.com/97-00-SUZUKI-GSXR600-Economy-Carburetor/dp/B002OPPKKY
https://www.youtube.com/watch?v=SFj1yM6m5QI
https://www.manualslib.com/manual/896122/Suzuki-Gsx-R600.html
https://www.partsfish.com/page/oem-parts-for-suzuki
https://www.manualslib.com/manual/1215216/Suzuki-Gsx-600f-2000.html

Motorcycles | 69 views | 0 helpful votes


Hi, Joseph you need to make sure you have no intake leaks by spraying some Brake Kleen, Contact Cleaner, Starting Fluid, etc. around the intake manifold and seals, if the RPM's go up or down significantly then you have a leak that needs to be fixed before you can continue with the carburetor adjustment.
The engine should be at operating temperature with the choke off to set the idle at 1300 rpm. Turn the idle skrew clockwise to increase the idle speed and counterclockwise to decrease the idle speed. If you have access to your air-fuel mixture skrew you may turn it as well, if not there is a video below on how to gain access, make sure you start with clean or new spark plugs. Gently turn the air-fuel mixture skrew clockwise until it starts to bottom out "STOP" do not over tighten as it will damage the taper on the end, now back the skrew out 1-1/2 full turns to establish a starting point start the engine and check the idle rpm's and turn the idle skrew accordingly for 950-1050 rpm if necessary, turn the air-fuel mixture skrew 1/4 turn at a time and let the engine settle for about 10 seconds, turn the skrew clockwise for a leaner mixture and counterclockwise for a richer mixture, you are seeking the highest rpm your air-fuel mixture skrew can acquire without going past 3 full turns from the bottom then resetting the idle skrew back down to 950-1050 rpm If you can not detect any rpm change and can not stall the engine by turning the air-fuel mixture skrew all the way in then your pilot/low-speed jet is too big and needs to be replaced with the next size smaller. Final adjustment should be made with a clean air filter mounted to the carburetor.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.motorcycleforum.com/threads/problem-with-the-bike-not-idling-98-gsxr-600.94476/
https://www.riderforums.com/threads/idle-speed.43499/
https://www.manualslib.com/manual/896122/Suzuki-Gsx-R600.html
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki/

Motorcycles | 71 views | 0 helpful votes


Hi, Kenneth, I would really love to help you with your bike question but due to the magnitude of yesterday's solar flare the batteries in my crystal ball are dead and my mental telepathy headset circuitry was melted. I need the year, make, and model of your motorcycle please click on " Ask For More Information" directly below and provide this information in the box that will open and then click on the green "SEND" box in the bottom right-hand corner after it posts I will receive an "ALERT" icon that will allow me to respond to your information. Good luck and have a wonderful day.

Motorcycles | 110 views | 0 helpful votes


Hi, G I would really love to help you with your bike question but due to the magnitude of yesterday's solar flare the batteries in my crystal ball are dead and my mental telepathy headset circuitry was melted. I need the year, make, and model of your motorcycle please click on " Ask For More Information" directly below and provide this information in the box that will open and then click on the green "SEND" box in the bottom right-hand corner after it posts I will receive an "ALERT" icon that will allow me to respond to your information. Good luck and have a wonderful day.

Motorcycles | 67 views | 0 helpful votes

Not finding what you are looking for?
Motorcycles Logo

0 questions posted

Ask a Question

Usually answered in minutes!

Top Puma Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6339 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

richard libby

Level 2 Expert

209 Answers

Are you a Puma Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...