20 Most Recent 2003 Yamaha Road Star Questions & Answers

0helpful
3answers

Starter spins but won't engage.

Yamaha uses a one-way clutch for the starter. It is mounted to the rear of the stator. Sometimes it can be removed and cleaned. Most times it will need to be replaced.
1/28/2013 2:31:47 AM • 2003 Yamaha Road... • Answered on Jan 28, 2013
0helpful
1answer

Sarter work but moter dont turn over

sounds like you have a broken starter jack shaft
4/30/2011 5:35:11 PM • 2003 Yamaha Road... • Answered on Apr 30, 2011
0helpful
1answer

Where can I find the Battery Location on my 2003

insert key into ignition, turn to the left without pushing it in, that will release the seat, the battery is under it.
1/2/2011 3:36:55 AM • 2003 Yamaha Road... • Answered on Jan 02, 2011
0helpful
2answers

Bike dies at idle, have to choke it even when temp

Most likely gummed up jets from sitting for an extended time. remove carbs and clean out jets. see if that solves your problem. before you do this though remove your fuel line after filter and check for adequate fuel flow.
1/8/2010 1:33:27 AM • 2003 Yamaha Road... • Answered on Jan 08, 2010
0helpful
1answer

2008 Yamaha XVZ 1600 Road Star. What is the recommended front axle torque on an '08 Yamaha Road Star please?

Question edited for clarity.

Question moved from Cars & Trucks.

56 foot pounds.

Axel bolt torque specs? - 2005 Road Star

Yamaha Starbike Forum https://www.starbikeforums.com > ... > Road Star Jun 2, 2010 - Looks like rear is 110 ft lbs. Front 56 ft lbs. Here is a link to the service manual on line.

front axle nut/ bolt torque specs???

Road Star Raider https://www.roadstarraider.com > ... Sep 29, 2012 - Front wheel axle bolt torque is 52ft. lbs. The Front wheel axle pinch bolt is 17ft. lbs. Some where on here is the link to download the Raider ... front axle torque Mar 12, 2011 Need torque specs.. Mar 4, 2013 Torque setting for front wheel Jun 14, 2012 Front wheel removal Jul 3, 2015 More results from www.roadstarraider.com
5/20/2023 1:17:24 AM • Yamaha Road Star... • Answered on May 20, 2023
0helpful
1answer

2000 Yamaha Roadstar, why does the fuel pump kick in on hot days say 85 or over it fluds over on restart to the point it runs out on the ground?

I Have The 2003 Roadstar Silverado Silver Edition That was doing the same. After riding and shut down when I would restart the fuel would flow onto the ground, I called my so called tech. He he wanted to remove my fuel pump? I asked if he could adjust the float he just replaced and he said floats never need adjustments, well I dropped the float bowl and the tab I slightly adjusted it to close needle valve. No overflowing and plenty of Power.The Fuel Pump is very important so when you come in with power you have plenty of fuel supply. Hope this helps. PS, He no longer is touching My Rodie.
10/17/2021 4:09:34 PM • Yamaha Road Star... • Answered on Oct 17, 2021
0helpful
1answer

Clutch adjustment

here's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few .. let me know if u need help thanks
2/7/2019 9:33:22 AM • Yamaha Road Star... • Answered on Feb 07, 2019
0answers
Not finding what you are looking for?
2003 Yamaha Road Star Logo

13 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Yamaha Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Road Star Yamaha

  • Road Star Yamaha

Most Popular Question

sarter work but moter dont turn over

  • Motorcycles
Loading...