20 Most Recent 2001 Yamaha Xv 250 Virago S - Page 2 Questions & Answers

well if its a vaccum line there shouldnt be fuel there, i think your talking an overflow tube and no it shouldnt be leaking unless theres a problem, see a bike shop about his

I would use lithium grease on all the electrical connections including plug and coil. The lithium still transfers the electricity but keep condensation and moisture out. You may see some of this grease on many light bulb connections on cars and mabey your bike already has some of this.

You do have fuel in the tank? Pull fuel line from carburetor--turn fuel tap ON--fuel should run from line (into clean can or bottle). If none, the brass screen inside the tap body may be plugged. Remove screen and hold with pliers. Clean with carburetor cleaner from auto parts store. When you set choke, can you see anything happening? May have water in bottom of float bowl. Remove bowl to check (and clean).

No it would not because they are 6 years apart

Sure mirrors, nuts, bolts and screws. Maybe a fender and a bit of other stuff. But for the most part not much will match up and now you have this ugly monster in your garage and your next job is to figure out exactly how you are going to get rid of the da-- thing. Look a bit harder and get a match for your bike. Now you have something worthwhile.

A “very helpful” rating for this answer? Thanks!

clean the carbs!!! 4 years they're gunked up for sure. clean the jets and the float valves and all the fuel and air circuits

I need 2 rubber grommets #4 on your diagram for left side cover for verago 1100. Need some help ordering them ?

1) Most photocell timers have 1 year limited warranty, but unclear who carries warranty without knowing brand.Do not buy expensive timers with photoeye unless purchased at local store where ez exchange can be made for several years.Copy following link to help identify timer:http://waterheatertimer.org/Woods-timers-and-manuals.html#Moonray2) Buy Intermatic-Malibu power pack with 5 year limited warranty:http://waterheatertimer.org/Malibu-power-pack-stopped-working.html3) Set power pack to ON position (or override position) and then plug power pack into cheap 3-prong wall timer, for example timer with optional dawn-dusk or remote control sold at Lowes and Home Depot.http://waterheatertimer.org/pdf/Woods-49554-TM16-manual.pdf4) Add comment and describe timer in detail for more possible help If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

seems like a bad earth, check battery connectors, and any earth straps between engine and frame and also the connectors from each of the indicator wiring into the harness.

change them