20 Most Recent
1996 Yamaha FZX 250 Zeal - Page 7 Questions & Answers
How to check engine oil of Yamaha xj 600 ('91) using dip stick?
It has a window, why would you need a dipstick in a sealed system.
I actually just changed the oil in my bike and found myself wondering this same thing. I ended up over filling cause when I started to run her I saw the oil in the window disapear. So I thought, This cant be right. But shut her off and the oil filled back up in the window after a bit.
So after you change the oil and oil filter, run her down the street and back, put her on the centerstand, wait an hour or so, come back, look at the window and see if you have a little bubble at the very top. Add or subtract as needed. Gotta fill up that oil filter after its been changed so you'll probably have to top it off.
4/2/2022 4:22:57 AM •
Yamaha...
•
Answered
on Apr 02, 2022
1700. How can I adjust the tick over?
This will all depend on whether your bike is fitted with carburettors or a direct fuel injection system. Is this idle speed change a new problem? Sudden idle changes could be a sign of another issue. When was it last serviced? A dirty air or fuel filter can cause idle issues.
Engines that use a carburettor, (Carb), usually have an idle adjustment screw on the carb itself. I would recommend getting an expert to do this as adjusting carbs can be a tricky job. Direct injection systems are usually not adjustable without using specialist equipment.
3/22/2022 3:34:52 PM •
Yamaha...
•
Answered
on Mar 22, 2022
1972 Yamaha LT2 100 service manual
No, its supposed to have a "plug" in the head,, If memory serves, its a 17 or 19 mm hex plug with threads the same as your correct spark plug, Having a spark plug in there does not hurt anything as long as the "reach" is correct!
12/16/2021 3:32:57 AM •
Yamaha...
•
Answered
on Dec 16, 2021
2002 TTR 225. How can I get it to run?
There are three things to make an internal combustion engine run, 1- a properly timed spark
2 - Adequate compression
3 - Proper fuel/air mixture
.... this is provided all internal parts are in proper working order..
put the correct main jet and pilot jet back in to start, and then take the carb to a professional mechanic and have him clean and set it.
12/16/2021 2:59:51 AM •
Yamaha...
•
Answered
on Dec 16, 2021
Not finding what you are looking for?