20 Most Recent
2008 KTM 300 EXC-E Questions & Answers
I have a 91 ktm 300 exc and it bogs down and dies
Your carb needs to be cleaned. More specifically, the pilot jet, but if it's clogged it'd be best to go ahead and clean the whole thing.
Remove the carb from your bike and then remove the bowl from the bottom. You'll then be looking at the jets and float valve. The jet causing your issue is the smallest one. Remove it and carefully spray it out with carb cleaner. Then hold the jet up and see if you can see light through the hole and that it appears clean and round-meaning no obstruction left. Locate the mixture screw on the outside of the carb. It should use a flat screwdriver. First turn the screw in and count the number of turns. Then remove the screw, followed by the spring and ,if applicable, a small o-ring. Spray through the hole and make sure it goes through and comes out somewhere. Replace the screw in the reverse order and set to the original setting you counted in the beginning.(rough estimate is 1.5 turns out. Cleanliness is the key to the carb working. So keep it spotless inside and reinstall. This should take care of your problem.
How to recharge rear shock
08 needing recharged? if it needs recharged it probably needs new seals. it's cheaper to send it to http://www.factoryconnection.com/index2.htm than to take it to a dealership or buying the equipment needed to do it yourself $$
an alternative......convert it from pds to bladder and make rebuilding easier
http://www.racetech.com/EmailList/News/RTnews-080630.html
Noisy 2001RM 125
Dont run a noisy motor bike or you'll ruin it. Slip it again and go see...
Leaking fork seals
Im replacing the fork seals on my 250yzf just wondering what the oil is thanx gary
Cant find part
There is a local KTM dealer here where I live. The number is 904-247-1622, I've been there and they seem to be really nice people and will work with you.
LC4 640 SMC. Why no spark?
Have you checked battery connections. Run switch in the correct position? Checked spark plug for debris? Just thinking out loud..
Oil drain plug case cracked 2007 KTM 450 SXF
Drain oil. Use degreaser to clean area. Use JB Weld & allow to set up properly before adding oil.
If you’ve found this helpful, please click the green “helpful” icon. If you have 20 seconds please leave a few words as a review or recommendation! Also, follow me for more answers to everyday issues, I’m all for saving you money and making the most of your time! Thanks and have a great day!
Engine bogging 2006 KTM 65 SX
my best friend's sister-in-lAw mAkes $74 every hour on the computer. She hAs been unemployed for ten months but lAst month her pAyment wAs $16505 just working on the computer for A few hours. go to this web site And reAd more go to this site home tAb for more detAil ...
www.online-3.com
Not finding what you are looking for?