20 Most Recent 1998 kawasaki ZX-6R Ninja Questions & Answers


Hi, Ed98766 and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Vacuum line from the petcock to intake manifold cracked.
5. Float needle and seat sticking.
6. Float level too low.
7. Carburetor bowl vent line clogged/blocked/pinched.
8. Idle adjusting screw set too low.
9. Air/fuel mixture screw set too lean.
10. Idle port, transfer ports, slow air jet clogged.
11. Slow fuel jet clogged.
12. Faulty fuel pump.
13. Faulty auto choke or wiring connection.
For more information about your issue and valuable "Free" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
97 ZX6R Turns over but won hold idle
2003 Kawasaki Ninja ZX6R Idle and Stalling issue
Kawasaki Ninja ZX 6R 1995 2002 Service Repair Factory Manual Download... $15
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


1998 kawasaki... | Answered on Mar 23, 2018


Remove and lay spark plug (still connected to wire) on engine. Should see a good spark whwn cranked. Remove fuel, turn petcock on with vacuum pump to the third line (if equipped), should have good flow of fuel. If oil not more than 1 qt down, shouldn't affect it. I would empty the gas and put in frsh, with some cleaner (2 oz Chemtool).

1998 kawasaki... | Answered on Mar 06, 2015


Check the exhaust. Sometimes the muffler will partially collapse internally, (louder noise). This restriction in the flow of exhaust gases is commonly called "back pressure". The back pressure will cause a lack of power and loss of higher revs.

Disconnect the exhaust system and ride around the block without a muffler. It will tick off mom and dad but the kids will love it. If the problem instantly disappears then you can go find a new set of pipes.

Please rate this solution as "FixYa" ( if it works ). Thanks!

1998 kawasaki... | Answered on Dec 17, 2014


tighten or replace

1998 kawasaki... | Answered on Apr 18, 2014


Does the engine misfire? Check your HT leads (connect the spark plugs to the coils) is one of them loose?

1998 kawasaki... | Answered on Apr 09, 2014


sounds like a ground problem. look for where the wire loom is grounded to the frame. it's probably loose.

1998 kawasaki... | Answered on Jan 14, 2014

Not finding what you are looking for?
1998 kawasaki ZX-6R Ninja Logo

84 questions posted

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6480 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

ZX-6R Ninja kawasaki

  • ZX-6R Ninja kawasaki

Most Popular Question

98 vulcan 800 started last night wont

  • Motorcycles
Loading...